Order Tray | Contact Us | Home | SIG Lists

[aprssig] 12V wiring ideas

KBØNLY kb0nly at mchsi.com
Sat Oct 29 18:46:59 UTC 2011


I have seen PP's come apart many times with no tension on the wires.  So I 
know its possible.

I to use addon fuse blocks which use 1/4" QD terminals.  More secure, less 
troublesome, simple to install the crimps, and they haven't failed me yet.

73,

Scott KBØNLY


-----Original Message----- 
From: DALE
Sent: Saturday, October 29, 2011 1:31 PM
To: TAPR APRS Mailing List
Subject: Re: [aprssig] 12V wiring ideas

Power poles do not vibrate apart unless there is tension on the wires.
There are locks available if you do not want them to pull apart.
I would rather have then pull apart than to have the wires pull out.
dale
40 years with no problems with Power Poles

----- Original Message -----
From: "Bob Burns W9RXR" <w9rxr_ at rlburns.net>
To: "TAPR APRS Mailing List" <aprssig at tapr.org>
Sent: Saturday, October 29, 2011 4:00:22 AM
Subject: Re: [aprssig] 12V wiring ideas

The one concern I have about Anderson PowerPoles is that they are not
a positive locking connector. They depend on friction to stay
connected. Without some sort of lock, they could vibrate apart,
especially in a mobile installation. Don't get me wrong--I love
PowerPoles and use them in other applications. But they do have limitations.

For my mobile installs, I use a Blue Sea Systems blade fuse block.
They are available with either 6 or 12 individually fused circuits
and they use screw terminals for a positive, vibration resistant
connection. The block comes with a cover so your connections are
protected. And the design makes for a low-profile installation
without wires sticking out perpendicular to the panel on which the
fuse block is mounted. You can buy these fuse blocks from West Marine
(on-line or at one of their many stores around the country). A little
pricey, but I've never had any problems with them.

Bob...


_______________________________________________
aprssig mailing list
aprssig at tapr.org
https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig

_______________________________________________
aprssig mailing list
aprssig at tapr.org
https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig 




More information about the aprssig mailing list