Order Tray | Contact Us | Home | SIG Lists

[aprssig] 12V wiring ideas

KBØNLY kb0nly at mchsi.com
Sat Oct 29 22:07:36 UTC 2011


That’s always the excuse PP lovers use... But these were properly assembled, 
using the tool sold for them and insured that they are clicked together, 
etc.

I wouldn't trust them...  Last thing I need in an emergency is trying to fix 
some gimick connector that everyone thinks is great.

73,

Scott KBØNLY


-----Original Message----- 
From: Bob Bruninga
Sent: Saturday, October 29, 2011 1:56 PM
To: TAPR APRS Mailing List
Subject: Re: [aprssig] 12V wiring ideas

> I have seen PP's come apart many times with
> no tension on the wires.  So I know its possible.

Sure if the PP is not assembled right in the first place.  Anything not 
properly installed cannot be expected to work right.

If the PP contact is properly slid all the way in to where it hooks over the 
steel spring clip, then (and only then) will it be in the correct position 
and will properly do its job.  Sometimes people do not do that last little 
click and forget to look carefully to assure it is seated.

I use them all the time, and they never come apart.

Bob


_______________________________________________
aprssig mailing list
aprssig at tapr.org
https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig 




More information about the aprssig mailing list