Order Tray | Contact Us | Home | SIG Lists

[aprssig] Need some help with 30m igate

Bill Vodall wa7nwp at gmail.com
Fri Aug 3 20:05:44 UTC 2012


What client are you using?   APRSX?   You have to define the "kiss
port 1" in addition to kiss port 0 - or set the default KISS port from
the TNC mode before going to KISS - I think - it's been too long since
I've done that .

73
Bill

PS.  Hmmm - I have the radio on 10.149 - I have the KAM running in
KISS mode next to it.  One wire to the KAM and I'm monitoring again.
Just like back in the early 90's...   Where the old paper Atlas?
Where's N7LUS truck mobile?


On Fri, Aug 3, 2012 at 12:59 PM, Matthew Willis <mattwillis at gmail.com> wrote:
> On Fri, Aug 3, 2012 at 3:43 PM, Bill Vodall <wa7nwp at gmail.com> wrote:
>> Get it back to receiving - with the far too tricky tuning - and then go for transmitting.
>
> Yeah, that's the problem at the moment -- once the TNC is in KISS mode
> I don't seem to see anything come in even when the "Tx" light goes
> solid for quite a while and the bar graph shows "proper" mark and
> space action.  I'm not sure if there's something special I need to do
> with the KAM+ to get RX data from the HF port once it's in KISS mode
> or what.
>
> -lilmatt
> N2PYI
>
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig



More information about the aprssig mailing list