[aprssig] New products

[Andrew Rich]

Scott,

I notice that the 434 MHz radio uses SPI commands from MCU.

I looked at these and found the easyradio modules heaps easier.

The easyradio you just send the payload, and if wait for so long, the TX 
will send.

I found this heaps easier than having to code up SPI

Easyradio does everything in the one package.

Been using them with GPS and 16F628

19k2 on air 433 MHz

- Andrew Rich VK4TEC -


----- Original Message ----- 
From: "Scott Miller" <scott at opentrac.org>
To: "TAPR APRS Mailing List" <aprssig at tapr.org>
Sent: Saturday, February 25, 2012 9:22 AM
Subject: [aprssig] New products


> We've just added a few things to the Argent Data Systems online store:
>
> GTRANS-DIN cable, to connect the Yaesu FTM-350 to a Garmin nuvi 350:
> https://www.argentdata.com/catalog/product_info.php?products_id=158
>
> RFM12BP 500mW 433 MHz data transceiver:
> https://www.argentdata.com/catalog/product_info.php?products_id=157
>
> OpenTracker USB bundle:
> https://www.argentdata.com/catalog/product_info.php?products_id=154
>
> Tracker3 model OT3m:
> https://www.argentdata.com/catalog/product_info.php?products_id=155
>
> We've got prototypes of an OpenTracker USB board (upgradeable to a 
> Tracker3) with the 433 MHz transceiver and that will be a new product 
> eventually.  For now I figured we ought to list the bare transceiver 
> modules since we've got them in stock already.  They should make good 
> low-cost, short-range trackers.
>
> We're still running at least a week behind on OT3m production, but at 
> least it's on the site now.
>
> 73,
>
> Scott
> N1VG
>
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig