[aprssig] objects not being released

[Bob Bruninga]

Apparently WINLINK is not listening and accepting new OBJECTS.  Same will also happen if one tries to takeover a local FREQ object being properly sourced at a digi.

The digi does not listen for updates...

Bob, WB4APR

>   I'm trying to correct a mistake in an object of my
>   winlink gateway, I adopted the object in ui-view
>   expecting the incorrect object to stop sending, this
>   is what I send out on APRS-IS
>
>   17:05:55R PE1RDW>APU25N,APRUDP*,PE1RDW-2*,WIDE2-1
>   Port=1 <UI C
>   Len=71>:;PI1HSD-10*011605z5143.44NW00508.07Ea144.850MHz
>   1200 R12m BPQ32 Public
>
>   To my surprice the object just changed back to the
>   wrong setting:
>
>   WINLINK>APWL2K,TCPIP*,qAC,T2CMH:;PI1HSD-10*010513z5143.
>   NW00507.  Ea144.850MHz 1200 R12m RMSPacket Public
>
>   Anyone got an idea why the object takeover is not
>   working as per the specs and who to contact?
>
>   73 Andre PE1RDW
>________________
>_______________________________________________
>aprssig mailing list
>aprssig at tapr.org
>https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig