[aprssig] re-emerging of: What is the Ultimate APRS digipeater?
skyssx at gmail.com
Tue Jan 10 15:30:17 CST 2012
Here's the pinout for the GPIO pads.
http://www.raspberrypi.org/archives/384 The board will not ship with
headers to reduce cost. A trivial thing to add for a tinkerer.
Alternatively, one could use the Chumby Hacker Board,
http://www.adafruit.com/products/278 , less capable, but only 200mW. More
connectivity out of the box, too.
On Tue, Jan 10, 2012 at 4:21 PM, Andre <aprs at pe1rdw.demon.nl> wrote:
> As long as you install the libs and tools needed to compile or can
> crosscompile for ARM it will run digi_ned just fine, just need to add usb
> to serial converters.
> 73 Andre PE1RDW
> Op 10-1-2012 22:03, Eric Hansen schreef:
> http://www.raspberrypi.org/ $25 ARM computer, GPIO, fully flash storage,
> 500mA power draw. Runs embedded linux, but could conceivably run any
> desired OS. Seems like it would be ideal.
> On Tue, Jan 10, 2012 at 3:40 PM, Andre <aprs at pe1rdw.demon.nl> wrote:
>> Just noticed a slightly older topic on multi input aprs digipeater on
>> aprs.org, not sure if it was at the top of the front page longer but did
>> notice one thing:
>> Bob writes that a TNC like that (with 2 1k2 inputs 1 9k6 input and 1k2
>> and 9k6 outputs) does not exist yet, however it does, just not off the
>> shelf, just hook up as many kiss tncs as needed including on inputs of
>> repeaters to an embedded platform like mini industrial pc or car pc and run
>> digi_ned on that, you can route trafic as needed and as a bonus also show
>> what port the original packet is comming from.
>> another bonus is that you can bridge several of these digipeaters
>> together trough internet (ax/aprs-udp) for exsample to suport events
>> crossing several aloha circles.
>> yes I know these embeded pcs use more power then a single stand alone TNC
>> but the flexabilety needed for this idea is to date only avialable (and
>> already done at several locations) this way.
>> 73 Andre PE1RDW
>> aprssig mailing list
>> aprssig at tapr.org
> aprssig mailing listaprssig at tapr.orghttps://www.tapr.org/cgi-bin/mailman/listinfo/aprssig
> aprssig mailing list
> aprssig at tapr.org
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the aprssig