Order Tray | Contact Us | Home | SIG Lists

[aprssig] D710 Greenlight Labs GPS and AVMAP?

Bob Bruninga bruninga at usna.edu
Thu Jun 21 15:05:14 UTC 2012

I don't need input from the AVMAP since the Greenlight is always connected.
I just want the output data (waypoints) to show on the AVMAP.  So is it true
that the Greenlight does have a pass-through sub minim jack?


-----Original Message-----
From: aprssig-bounces at tapr.org [mailto:aprssig-bounces at tapr.org] On Behalf
Of Stephen H. Smith
Sent: Thursday, June 21, 2012 9:43 AM
To: TAPR APRS Mailing List
Subject: Re: [aprssig] D710 Greenlight Labs GPS and AVMAP?

On 6/21/2012 12:02 AM, Brad Burleson wrote:
> On Wed, Jun 20, 2012 at 7:40 PM, Stephen H. Smith <wa8lmf2 at aol.com> wrote:
>> Since they both use the 2.5mm D710 GPS input, you will have to unplug one
>> order to use the other.
> Right, but doesn't the Green Light Labs GPS have a pass-thru for the
> 2.5mm connector?
> I'd _think_ you could simply connect the 'labs GPS to the D710 then
> connect the AVMAP to the GPS's pass thru.

But both the Greenlight and the AVmap have active RS-232 OUTPUTs that would
trying to send out NMEA GPS data toward the D700/D710 at the same time.

It works to parallel multiple RS232 RECEIVERS across one RS-232 source.
Trying to parallel multiple RS-232 SOURCEs across one receiver won't work so



Stephen H. Smith    wa8lmf (at) aol.com
Skype:        WA8LMF
Home Page:          http://wa8lmf.net

High-Performance Software-Only Packet TNC

High Quality Calibrated Static Maps for Any APRS App

  Vista & Win7 Install Issues for UI-View and Precision Mapping

"APRS 101"  Explanation of APRS Path Selection & Digipeating

aprssig mailing list
aprssig at tapr.org

More information about the aprssig mailing list