[aprssig] Blue Horizon Balloon info
noskosteve at yahoo.com
Sun Mar 25 16:11:52 CDT 2012
I agree 100%. Everyone likes to post the URL, but Last time and this has little info of value. They need to assign an information Officer. I'll see if John is receptive. (I'm temporarely stuck on an older browser)
Sent from my Knight-Kit Crystal Set.
73, Steve, K9DCI
> From: Bob Bruninga <bruninga at usna.edu>
> Date: Sunday, March 25, 2012, 4:06 PM
> Please pass back to the Blue Horizon team that I find their
> web page to be pretty useless. Maybe I am not seeing
> something bccause I have an old browser, but there is no
> practical or educational information one would expect to
> Further, it is amazing that a group with such ambitions and
> background of multiple balloon launches over several years
> would launch an APRS payload that ignores nearly two decades
> of recommendations on how to configure an APRS device for
> balloon operation.
> Now I will be the first to admit, that mistakes happen, and
> believe me, I have made them all... but, otherwise, we
> need to get in touch with these folks and ask them to put up
> a less fancy web page that focuses more on substance.... one
> with more useful information. And to use the proper
> callsign and symbol for a balloon, and most importantly, to
> use an appropriate APRS path at altitude.
> Just some backseat kibitzing.
> Bob, WB4APR
> > Yikes! Looks like information is
> all over the
> > place. My browser is not letting
> me get any useful
> > info from the Blue Horizon site
> (or it just isn't
> > there). All I heard last night
> on 30 M was "N2XE MT
> > MT" and "N2XE ME MT" at random,
> but frequent
> > intervals.
> > I have been in email contact with
> John, N3XE and
> > here's what he says a few minutes ago,
> Steve, K9DCI:
> > Thanks for the note, we really need an
> > status for the balloon which is now
> somewhere over
> > the Atlantic Ocean. The website
> > www.projectbluehorizon.com and you can
> get a bunch
> > of info there as well as report and
> telemetry you
> > recieve. The 30 meter beacon
> transimits at 10, 30
> > and 50 minutes after the hour on
> 10.1465 +/- 500 Hz
> > depending on the payload
> temperature. If you could
> > copy the beacon we would be eternally
> greatful since
> > we are not getting it here in New
> York. IF you
> > could spread the word, even better!
> > Yes the telemetry callsign is N2XE
> > The format is
> > Lat
> > Long
> > Altitude in meters (divided by 100)
> > Battery voltage (Divide by 10)
> > From John C. N2XE himself. We
> ... from his
> > BlackBerry, that is. Typos and all.
> > - - - - - - - - - - - - - - - - - - -
> - - - - - - -
> > -
> > Other posts here include:
> > APRS on 144.39.
> > HF info: CW mode, transmitting morse
> code lat ,
> > long, altitude, battery voltage.
> > 30m at 10.14658 05, 25, 45 minute of
> every hour.
> > 40m at 7.10231 MHz 10, 30, 50
> minute of every hour.
> > From twitter:
> > The 30m beacon reports on the 00, 20,
> 40 min every
> > hour, 40m beacon on the 10, 30, 50
> every hour, 30m
> > has been easier to rx .
> > Apparently, the 30 meter
> schedule info published
> > at http://www.projectbluehorizon.com/#input
> > incorrect at 5, 25, 45 minutes.
> arghhhh, been
> > listening at wrong times.
> > Also hearing a non
> position beacon at odd
> > intervals on 30m.
> > Sent from my Knight-Kit Crystal Set.
> > --
> > 73, Steve, K9DCI USN (Vet) MOT (Ret)
> Ham (Yet)
> >aprssig mailing list
> >aprssig at tapr.org
> aprssig mailing list
> aprssig at tapr.org
More information about the aprssig