[aprssig] KPC2 like a fill in digi
Tom Hayward esarfl at gmail.comTue Mar 27 17:03:07 UTC 2012
- Previous message: [aprssig] KPC2 like a fill in digi
- Next message: [aprssig] KPC2 like a fill in digi
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
For aprs.fi to accurately determine the path of a packet, each digipeater must support callsign substitution. When you use the UIDIGI command found in more sophisticated digipeater software, the digipeater callsign is inserted into the path when it digipeats the packet. If your TNC supports UIDIGI, you would program it like this: UIDIGI ON WIDE1-1 And then it would mark packets like this: in: KD7LXL>APRS,WIDE1-1: out: KD7LXL>APRS,5K3PRS-3,WIDE1*: The KPC2 does not have the UIDIGI command. The alternative is to use the MYALIAS command instead. When the above packet is digipeated with the MYALIAS function, it will look like this: KD7LXL>APRS,WIDE1-1*: Your KPC2 does not leave any information that 5K3PRS-3 digipeated the packet! aprs.fi does not know who digipeated the packet, so it does not draw a line. Tom KD7LXL On Tue, Mar 27, 2012 at 09:51, Eduardo Gomez Lopez <edogl78 at gmail.com> wrote: > Yes, my digi is configured like that: > > Mycall 5K3PRS-3 (is the unique) > Myalias WIDE1-1 > Digi on > Btext !0000.00N/00000.00W#W1-1 APRS HK (with the correct location) > Beacon every 30 > Unproto APNK80 (like kantronics kam 8.0) without via > > What setup I need more? > > > Eduardo Gómez L. > Editor conceptual de entretenimiento > Caracol Televisión > > El 27/03/2012, a las 10:46 a.m., Lawrence LaBranche > <Capdiamont at yahoo.com> escribió: > >> Did you use different SSID on all your devices? Is your digi sending a position report? >> >> KI6ZQY >> >> Sent from my iPod >> >> On Mar 27, 2012, at 8:36 AM, Eduardo Gomez Lopez <edogl78 at gmail.com> wrote: >> >>> Hi, I have some problem with a KPC2 TNC because I want to put it as a >>> fill in digi WIDE1-1. It is working very well but in APRS.fi does not >>> "draw" the Path that this digi is retransmitting. >>> >>> In APRS.fi shows like my car send the frame direct to the igate, not >>> through the digi. Why happen that? Can i do something to exist in the >>> graphics? Right now my digi is like a ghost >>> >>> Sorry about my English. Speak Spanish >>> >>> >>> Eduardo Gómez L. >>> Editor conceptual de entretenimiento >>> Caracol Televisión >>> HK6PQI >>> >>> _______________________________________________ >>> aprssig mailing list >>> aprssig at tapr.org >>> https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig >> >> _______________________________________________ >> aprssig mailing list >> aprssig at tapr.org >> https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig > > _______________________________________________ > aprssig mailing list > aprssig at tapr.org > https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig
- Previous message: [aprssig] KPC2 like a fill in digi
- Next message: [aprssig] KPC2 like a fill in digi
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
More information about the aprssig mailing list
