Order Tray | Contact Us | Home | SIG Lists

[aprssig] KPC2 like a fill in digi

Eduardo Gomez López hk3pqi at gmail.com
Wed Mar 28 19:01:54 UTC 2012


Thanks again, so what is the best configuration of the tiny4 for the
new paradigm widen-N? We have two tiny4 and we want to put as wide
digi. Right now we have a wide digi with digi_ned running and now we
want put this new digis to help it. Is very important for us, our
group is starting in the design of the net here in Bogota, Colombia,
so is very important to us your help. Thank you very much and see you
soon at APRS.fi

73,
HK3PQI
Ex- HK6PQI


Eduardo Gómez L.
Editor conceptual de entretenimiento
Caracol Televisión

El 27/03/2012, a las 12:50 p.m., Tom Hayward <esarfl at gmail.com> escribió:

> I am not very familiar with the TinyTrak4, but yes, it does advertise
> callsign substitution. It can be programmed as a WIDEn-N digi. I do
> not know how to program it as a WIDE1-1 fill-in.
>
> I am more familiar with the Tracker2 (recently replaced by Tracker3).
> The Tracker2 also supports WIDEn-N and callsign substitution. To
> program it as a WIDE1-1 fill-in, set the digipeat alias to WIDE1 and
> hop-limit to 1.
>
> The KPC3+, D700, and D710 also support callsign substitution
> (depending on how they are programmed).
>
> This article describes how different TNCs may be programmed as fill-in
> digipeaters:
> http://www.aprs.org/newN/WIDE1-1settings.txt
>
>
> Tom KD7LXL
>
> On Tue, Mar 27, 2012 at 11:16, Eduardo Gomez Lopez <edogl78 at gmail.com> wrote:
>> Thank you so much, this is a grate answer, lol, in this case is more
>> "smart" the tinytrak4 because it has alias substitution? But only
>> works like a fill in digi right? Never like a wide digi. I'm in the
>> correct way?
>>
>> Thanks a lot
>>
>> HK6PQI
>>
>>
>> Eduardo Gómez L.
>> Editor conceptual de entretenimiento
>> Caracol Televisión
>>
>> El 27/03/2012, a las 12:04 p.m., Tom Hayward <esarfl at gmail.com> escribió:
>>
>>> For aprs.fi to accurately determine the path of a packet, each
>>> digipeater must support callsign substitution. When you use the UIDIGI
>>> command found in more sophisticated digipeater software, the
>>> digipeater callsign is inserted into the path when it digipeats the
>>> packet.
>>>
>>> If your TNC supports UIDIGI, you would program it like this:
>>> UIDIGI ON WIDE1-1
>>>
>>> And then it would mark packets like this:
>>> in: KD7LXL>APRS,WIDE1-1:
>>> out: KD7LXL>APRS,5K3PRS-3,WIDE1*:
>>>
>>> The KPC2 does not have the UIDIGI command. The alternative is to use
>>> the MYALIAS command instead. When the above packet is digipeated with
>>> the MYALIAS function, it will look like this:
>>>
>>> KD7LXL>APRS,WIDE1-1*:
>>>
>>> Your KPC2 does not leave any information that 5K3PRS-3 digipeated the
>>> packet! aprs.fi does not know who digipeated the packet, so it does
>>> not draw a line.
>>>
>>>
>>> Tom KD7LXL
>>>
>>> On Tue, Mar 27, 2012 at 09:51, Eduardo Gomez Lopez <edogl78 at gmail.com> wrote:
>>>> Yes, my digi is configured like that:
>>>>
>>>> Mycall 5K3PRS-3 (is the unique)
>>>> Myalias WIDE1-1
>>>> Digi on
>>>> Btext !0000.00N/00000.00W#W1-1 APRS HK (with the correct location)
>>>> Beacon every 30
>>>> Unproto APNK80 (like kantronics kam 8.0) without via
>>>>
>>>> What setup I need more?
>>>>
>>>>
>>>> Eduardo Gómez L.
>>>> Editor conceptual de entretenimiento
>>>> Caracol Televisión
>>>>
>>>> El 27/03/2012, a las 10:46 a.m., Lawrence LaBranche
>>>> <Capdiamont at yahoo.com> escribió:
>>>>
>>>>> Did you use different SSID on all your devices? Is your digi sending a position report?
>>>>>
>>>>> KI6ZQY
>>>>>
>>>>> Sent from my iPod
>>>>>
>>>>> On Mar 27, 2012, at 8:36 AM, Eduardo Gomez Lopez <edogl78 at gmail.com> wrote:
>>>>>
>>>>>> Hi, I have some problem with a KPC2 TNC because I want to put it as a
>>>>>> fill in digi WIDE1-1. It is working very well but in APRS.fi does not
>>>>>> "draw" the Path that this digi is retransmitting.
>>>>>>
>>>>>> In APRS.fi shows like my car send the frame direct to the igate, not
>>>>>> through the digi. Why happen that? Can i do something to exist in the
>>>>>> graphics? Right now my digi is like a ghost
>>>>>>
>>>>>> Sorry about my English. Speak Spanish
>>>>>>
>>>>>>
>>>>>> Eduardo Gómez L.
>>>>>> Editor conceptual de entretenimiento
>>>>>> Caracol Televisión
>>>>>> HK6PQI
>>>>>>
>>>>>> _______________________________________________
>>>>>> aprssig mailing list
>>>>>> aprssig at tapr.org
>>>>>> https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig
>>>>>
>>>>> _______________________________________________
>>>>> aprssig mailing list
>>>>> aprssig at tapr.org
>>>>> https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig
>>>>
>>>> _______________________________________________
>>>> aprssig mailing list
>>>> aprssig at tapr.org
>>>> https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig
>>>
>>> _______________________________________________
>>> aprssig mailing list
>>> aprssig at tapr.org
>>> https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig
>>
>> _______________________________________________
>> aprssig mailing list
>> aprssig at tapr.org
>> https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig
>
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig



More information about the aprssig mailing list