Order Tray | Contact Us | Home | SIG Lists

[aprssig] newbee with D72 and AVMAP G5

Bob Bruninga bruninga at usna.edu
Tue May 1 17:09:46 UTC 2012


But the menu has separate INPUT and OUTPUT menu's.  So if its not supposed
to be done, then the bug is that the menu;s don't match reality.  Bob

-----Original Message-----
From: aprssig-bounces at tapr.org [mailto:aprssig-bounces at tapr.org] On Behalf
Of Lynn W. Deffenbaugh (Mr)
Sent: Tuesday, May 01, 2012 12:50 PM
To: TAPR APRS Mailing List
Subject: Re: [aprssig] newbee with D72 and AVMAP G5

Probably not a bug.  Typical devices expect to have a single GPS active
at any point in time.  If you expect it to talk to an external GPS, then
it will expect the GPS source to come from there.  From an
implementation point of view, it makes sense to require the external GPS
to be enabled to get waypoints to go out there.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 5/1/2012 11:58 AM, Bob Bruninga wrote:
>>> No combinations of the above worked. Tried both at 4800 also. Notice I
> never
>>> tried enabling the COMPORT INPUT to GPS, since the D72 has its own GPS.
>>> Could that have been it?
>> The instructions for using the AvMap G6 with the TH-D72 say to disable
>> the internal GPS and set the D72 for external GPS. I assume you'd use
>> the same procedure with the AvMap G5.
> Does this sound like a bug then with the D72?  That it cannot use the
> internal GPS while outputting waypoints to the serial port?
>
> Bob
>
>
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig
>


_______________________________________________
aprssig mailing list
aprssig at tapr.org
https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig




More information about the aprssig mailing list