Order Tray | Contact Us | Home | SIG Lists

[aprssig] FW: FREQ Object radio issues (c)

Bob Bruninga bruninga at usna.edu
Tue May 8 17:51:43 UTC 2012

REV-C.   Adding new ones as they come in.  New ones top posted:

NON-PRINTABLE CHARACTERS in the D710 after the QSY Freq:  Traced to RT
Systems Software used to program their radios.  Fixed in new RT software.

Use of the "xyz" in the OBJECT NAME:

> FFF.FF0xy object is OK and QSY is OK
> FFF.FF5xy object is OK and QSY is OK
> FFF.FFxyz object will not QSY in early D710 models.  Now fixed.

> FFF.FFxyz objects of any format will not QSY the FTM-350 (confirm?)

Extra "0" on end of the +xxx or -xxx OFFSET format.  The THD72 will accept
extra characters after the required +xxx or -xxx.  These will all give the
proper offset:

> 440.000MHz tOFF +500 Bob's radio
> 440.000MHz tOFF +5000 Bob's radio
> 440.000MHz tOFF +5000Bob's radio
> 440.000MHz tOFF +5000000 Bob's radio
> 440.000MHz tOFF +500Bob's radio

BUT SHOULD NOT BE USED until confirmed all existing radios can tolerate it.
This was a proposed backwards-compatible future fix to making the offset
more human readable, because then we could recommend the use of +5000
instead of the +500.  But this CANNOT BE USED until we have surveyed all
radios to see if ALL radios can properly set the offset if the additional
"0" is included.  Or all radios are upgraded to do so

Here are some other known issues for the Compatibility table of position

Leading space:   (required, required-not, don't care) - (Y, N, X)

Xmits space:     (Transmits leading space) - (Y, N)

Requires "MHz":  (Requires mixed case, allows any case) - (Y, N)

Requires "MHz_": (Requires trailing space) - (Y, N)

Xmits MHz_:      (Transmits trailing space) - (Y, N)

Responds to +xxx and -xxx offsets - (Y, N)

Transmits offsets +xxx and -xxx   - (Y, N)

Allows extra trailing zero so that +600 works, where only +60 is IAW spec -
(Y, N)

More information about the aprssig mailing list