Order Tray | Contact Us | Home | SIG Lists

[aprssig] APRS in caves! (mammoth map) & HF test result

Dave B dave at g8kbv.demon.co.uk
Thu Nov 22 12:36:03 UTC 2012


Bob..

No need to re-invent the wheel...

Google "Cave Radio".  It's all been done to death many time, and with 
great success.  Mostly voice, but some digital too.

http://bcra.org.uk/creg/#radio
http://www.scavalon.be/avalonuk/technical/radio1.htm
http://caves.org.uk/radio/
http://radiolocation.tripod.com/

and there are more of course.

You guys have too many restrictions on what you can do over there, re 
modulation scheems etc I think.

Plus the way HF is open these days, you'll probalby suffer mutual QRM 
with oher HF users above ground, even if you use QRP.

73..

Dave G0WBX.


On 21 Nov 2012 at 14:38, Robert Bruninga wrote:

> Initial HF Test Results:
> 
> Just to get some experience with HF on the ground, I connected two
> FT-817 portables with KPC3 TNC's to a pair of 80m dipoles and placed
> them about 0.4 miles apart on the ground (football fields less than 10
> feet above sealevel (sea was adjacent). See photo on
> http://aprs.org/cave-link.html . Dipoles wrapped around the radio for
> carrying. The results were dismal. Over that distance, signals were
> way too noisy for packet on 80m, even after going back and getting a
> tuner. Lesson! Do not use magent wire, use thick insulated wire for
> your dipoles so you can see them and so they don't end up in a million
> knots!
> 
> Success: Before leaving, however, I shortened the dipoles for 15m and
> this time, signals were strong and the link was solid.  Antennas
> laying flat on the ground.  This test was not intended to test the
> through ground performance, but was to test the node-to-node
> above-ground link performance. This would allow these HF backbones to
> then link the below ground packets back to headquarters without
> needing cross-band TNC's at each node.
> 
> To do FM legally, we'd need to go to 10m and so the question is, how
> well does 10m penetrate down to the cave?  There is lots of experience
> with CB, so I guess I need to read up on it.
> 
> Bob, WB4APR
> 
> -----Original Message-----
> From: Robert Bruninga [mailto:bruninga at usna.edu]
> Sent: Monday, November 19, 2012 9:04 PM
> To: TAPR APRS Mailing List
> Cc: APRS at yahoogroups.com
> Subject: APRS in caves! (mammoth map) & HF
> 
> HF VERTICAL LINKS:  I just realized that since HF penetrates a few
> hundred feet vertically, we can use HF to link up to the surface every
> 7 hops or so.  Just an FT-817 with a DIPOLE above and below ground
> hooked to a TNC can provide the link  Once above ground, then hops
> continue on VHF.
> 
> Each vertical link takes up 2 hops, but it sure beats having to do 14.
>  We need some people experimenting with HF packet FM (with squelch) on
> 80m (below ground since it would not be legal above ground)...  I
> gotta do some research on HF links...
> 
> Also this gets more hams involved.  SOme hams not prone to caving, can
> man the top side stations.  One of the HF links will be right in the
> Lobby of the hotel and since it has WIFI, then that can be our IGATE!
> 
> > With this map, there's no easy way to separate the above-ground
> > elevation contours from the cave tunnels.
> 
> Not sure I follow.  The tunnels are dark black.  Everything else is
> color.  Its too early to start a huge investmnt in manually crossing
> over the data to a vector file until I find out "which" path is the
> MAIN CAVE.  The big portions are easy, but there are many places where
> there are multiple thin lines.
> 
> > Also, is this just the first level of the cave, or is it
> > several vertical levels drawn together?
> 
> all 6 levels.  So crossing black lines do not necessarily mean a
> connection.
> 
> Bob, WB4APR
> 
> > Andrew Pavlin, KA2DDO
> > ------Original Message------
> > From: Robert Bruninga
> > To: APRS at yahoogroups.com
> > Cc: aprssig at tapr.org
> > Sent: Nov 19, 2012 4:58 PM
> > Subject: Re: [aprssig] [APRS] APRS in caves! (mammoth map)
> >
> >
> > Mammoth cave underlay on local terrain map is now complete.  The map
> > has
> a
> > LAT/LONG grid on the sides so one can pinpoint one's position into
> > the
> HT
> > underground to the same 0.01 Minute of LAT/LONG as on the surface.
> >
> > See http://aprs.org/cave-link.html
> >
> > So far, none of the modern clients seem to do GIF or JPG files.  But
> > as
> we
> > get closer to the 2 March 2013 test, maybe someone can develop a
> > vector overlay for the main passage.  Can YACC or APRSIS32 do APRS
> > Overlays?
> >
> >
> > Bob, WB4APR
> >
> > _______________________________________________
> > aprssig mailing list
> > aprssig at tapr.org
> > https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig
> >
> >
> > Sent from my Verizon Wireless BlackBerry
> >
> > _______________________________________________
> > aprssig mailing list
> > aprssig at tapr.org
> > https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig
> 
> 
> 






More information about the aprssig mailing list