[aprssig] A question for an electronic design tech./ engineer
noskosteve at yahoo.com
Sat Sep 22 10:51:47 CDT 2012
Saw your added info after sending.
I would also be highly inclined to use another technology including a processor, but info on the way it is used would still be helpful.
73, Steve, K9DCI
..additional criteria: be able to with stand down to 4 ATM's, neutral to slightly neg. buoyancy, small able to be held in one hand.
--- On Sat, 9/22/12, Steve Noskowicz <noskosteve at yahoo.com> wrote:
> From: Steve Noskowicz <noskosteve at yahoo.com>
> Subject: Re: [aprssig] A question for an electronic design tech./ engineer
> To: AA3JY at Winlink.org, "TAPR APRS Mailing List" <aprssig at tapr.org>
> Date: Saturday, September 22, 2012, 10:44 AM
> Hi Clay,
> It would help greatly if you gave information about what
> this is to be used for. It doesn't say, but appears to
> either be for finding the transmitting unit, or just knowing
> if the transmitter is near.
> What is the enviromnent this will be used in?
> What is the maximum distance that the receiver needs to
> hear the transmitter?
> Does it need to have direction finding ability, or just
> Does the transmitter need to last for a long time?
> I actually consulted in the design of a product slightly
> similar and had to solve some of the problems mentioned in
> the paper.
> If manufactured as described in that paper, it may very
> well be more expensive than needed due to the tuning
> procedure and special components.
> However, There is a good chance there is an easier way to
> accomplish the desired result.
> I also consulted on another project that used
> completely different technology that could be quite
> inexpensive for locating a "pinging transmitting unit".
> Please provide more information about the use of the
> Direct email, via arrl.net, or my web site Contact page.
> 73, Steve, K9DCI USN (Vet) MOT (Ret) Ham
> Up to date APRS Beginner Guide - updated Oct-2011
> Click 'APRS Beginner INFO' under Contact
> Manage Radio Memories with an Excel Spreadsheet !
> Click to tune. Click to capture Radio freq.
> All Memories on one page. Cut, Copy, Paste, Print 'em,
> TM-D700 | TH-F6A & F7
> | TS-2000
> | Icom 706MkIIG
> All PMs |Real-time & memories | Sat mems too | Loads Mem
> |Also does MCP.fx files
> NOT D710|
> A version for the D7 is in the works.
> More Details, Features and Downloads at:
> --- On Sat, 9/22/12, AA3JY at Winlink.org
> <AA3JY at Winlink.org>
> > From: AA3JY at Winlink.org
> <AA3JY at Winlink.org>
> > Subject: [aprssig] A question for an electronic
> design tech./ engineer
> > To: kc6ete at gmail.com
> > Cc: aprssig at tapr.org
> > Date: Saturday, September 22, 2012, 5:50 AM
> > David-
> > Currently looking at the cost of a single unit with a
> > possibility of future units..
> > https://sites.google.com/site/kendiver/PingerConstruction1.pdf
> > Thanks,
> > Clay AA3JY
> > _______________________________________________
> > aprssig mailing list
> > aprssig at tapr.org
> > https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig
> aprssig mailing list
> aprssig at tapr.org
More information about the aprssig