Order Tray | Contact Us | Home | SIG Lists

[aprssig] HF noise measuring campaign reports via APRS

Lynn W. Deffenbaugh (Mr) ldeffenb at homeside.to
Sun Sep 16 18:37:36 UTC 2012


Have you considered using the user-defined data format packet instead of 
overloading the (supposedly humanly readable) status report packet?

See chapter 18 of aprs101.pdf.

Interested parties could still read raw packets for a station or use an 
APRS-IS filter of t/u (user defined) to pick them all up.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

PS.  I hope I'm not too late to this discussion.  I've been a bit 
incommunicado recently.

On 9/14/2012 2:41 PM, Chris Moulding wrote:
> I'd like to add a feature in the SDR software to send the data by APRS 
> status report via the APRS-IS. It would also allow every ham with 
> access to APRS to view the noise data and run their own reports and 
> analysis.
>
> The data sent would be the RF frequency, peak noise level, the median 
> of the noise sampled over a period of time and the minimum noise level.
>
> At present I'm considering sending the data as a time stamped APRS 
> status report. For example:
>
> >141916z6.999,-100.1,-110.1,-120.1,10.100,-101.0,-111.0,-121.0
>
> In this example the first frequency is 6.999 MHz, the peak noise is 
> -100.1 dBm, the median is -110.1 dBm and the minimum is -120.1 dBm.
>
> The second frequency is 10.100 MHz, peak noise -101.0 dBm, median 
> -111.0 dBm and minimum -121.0 dBm.
>  The update rate would be say two status reports every 15 minutes so 
> that the changes in HF noise over the day can be recorded.
>
> With several stations recording data it would provide a very useful 
> reference over APRS to HF band noise conditions as well as providing 
> valuable long term data.
>
> Does anyone foresee a problem with this?
>
> If anyone can think of a better way to do it I'm open to ideas.
>
> 73,
>
> Chris, G4HYG
>
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig
>




More information about the aprssig mailing list