[aprssig] Automatic Voice RFelay System (AVRS) and ALLSTAR STANDARD

[Robert Bruninga]

> Tens of thousands or radios out there?

Sorry, I said "APRS radios"  IE, all those radios with BUILT-IN APRS
display capability.  IE, Kenwoods and Yaesu's...

Bob, Wb4APR


I have purchased several VHF mobile radios in the past few years and none
of them were equipped as you say they are.

Sent from my iPhone

On Sep 17, 2012, at 9:13 PM, Robert Bruninga <bruninga at usna.edu> wrote:

>> Perhaps a new APRS message could be defined specifically
>> to beacon such gateways with the relevant parameters
>> (most of which are in the standard position message anyway)
> Not only *no* but "heck no"!!!
>
> We have tens of thousands of mobiles out there with a perfectly good
APRS
> radio that can already display ALL relevant VOIP information to the
mobile
> operator.  The format is an APRS FREQUENCY OBJECT.  Then not only do the
> radios display the information, but they can also TUNE to that VOIP node
> with the press of a single TUNE or QSY button.
>
> This FREQUENCY OBJECT has been the #1 focus of APRS since 2001 and
> finalized in the spec since 2004, and built into all new radios since
> 2007?
>
> Do not even think of "inventing" a new format when we have already
gotten
> every player in this game (the APRS standard, and the APRS radio
> manufacturers producing radios) coming on board, with the AVRS engine,
the
> last piece of the pie, being the most critical link.
>
> The format has been well defined since 2004.  It is a  FREQUENCY object.
> Please do not throw away almost a decade of work, with knee jerk ideas.
>
> Thanks
>

_______________________________________________
aprssig mailing list
aprssig at tapr.org
https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig