[aprssig] A question for an electronic design tech./ engineer

[david vanhorn]

Ok, that adds some complication.
I've done underwater metal detectors.

I would be VERY tempted to change from analog circuitry to a processor, and
use magnetic reed switches for tuning. That can work through a permanently
sealed case.  Battery charging can be done inductively, but all
rechargeables have a finite lifetime.  Anything with seals though, is
problematic. Pressure isn't an issue, the casing can be filled with mineral
oil and then it will go deeper than you will without a JIM suit.


On Sat, Sep 22, 2012 at 9:30 AM, <AA3JY at winlink.org> wrote:

> ..additional criteria: be able to with stand down to 4 ATM's, neutral to
> slightly neg. buoyancy, small able to be held in one hand.
>
> https://sites.google.com/site/kendiver/PingerConstruction1.pdf
>
> Clay AA3JY
>
>
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tapr.org/pipermail/aprssig/attachments/20120922/ef97092a/attachment.htm>