[aprssig] Alinco DJ-S11 micro-HT's
bruninga at usna.edu
Wed Aug 7 16:32:15 CDT 2013
You nailed it!
> I would be suspicious of the battery terminals first.
> Have you tried with an external power source?
No, But then I just did and they all work! Thanks! We use them only on
battery power, so I didn't even have one of those 5.5 volt tiny power
connectors, but yes, now they work on external power.
Amazing thing is the battery contacts look good as new. Now, even
scraping them up a bit on the contact points still does not solve the
problem, but I bet it is the internal contact between those contacts and
the press-fit contact to the PCB.
I can take it from here. Thanks!
On 8/7/2013 9:58 AM, Robert Bruninga wrote:
> Does anyone else have problems with the old DJ-S11 Alinco micro-HT's.
These were 350mw 2m radios radios obviously built on an FRS foundation
which we use for low power packet demonstrations. Over time (many years),
they have all failed (wont turn on). Now 3 of 4 are dead.
> Anyone know of a common cause?
> Bob, WB4aPR
> aprssig mailing list
> aprssig at tapr.org
aprssig mailing list
aprssig at tapr.org
More information about the aprssig