[aprssig] APRS-B SRD?

Andrew Rich vk4tec at tech-software.net
Mon Jun 24 10:43:49 CDT 2013

So pick a ham freq and approach a manufacturer 

Sent from my iPhone
Andrew Rich

On 25/06/2013, at 1:31 AM, PE1RDW <aprs at pe1rdw.demon.nl> wrote:

> On Mon, 24 Jun 2013 16:53:47 +0200, Steve Noskowicz <noskosteve at yahoo.com> wrote:
>> I have 433.900 in an HT memory.  I haven't looked into these carefully, but ... Could there be an issue with all the remote wireless weather sensors and whatever else I hear constantly beeping, bleeping and squaking on the Part 15 frequency  433.900
>> 73, Steve, K9DCI USN (Vet) MOT (Ret) Ham (Yet)
> It's a 2 part question, legally these devices at least in Europe have no protection and operating at 10 mW eirp they are easily blasted aside.
> However in practice, you will become very unpopular in your neighborhood if you start actively using that frequency because not only wireless sensors are there but at least in Europe cheaper car alarms operate there too and no car with one of those installed will be able to start when you are transmitting (first hand experience when I was experimenting with wideband fm there) one of the biggest problems of SRD uses is that there are no rules for the recievers so they will lock on any strong signal within 100 khz so even retuning these things a bit won't help if you plan on adding an external amp
> -- 
> 73 Andre PE1RDW
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> http://www.tapr.org/mailman/listinfo/aprssig

More information about the aprssig mailing list