[aprssig] Android can do analog APRS on 144.39
jgorkos at gmail.com
Wed Mar 27 07:38:39 CDT 2013
FWIW, you can also connect to a TNC using the serial port mode of Bluetooth.
I have a bluetooth<->serial dongle that I attach to a TNC, and do APRS from
my android tablet with APRSDroid using a KPC3+ and a Yaesu VHF radio. Works
like a charm. I usually demo this during my APRS presentation.
From: Charles Bland <root at blandranch.net>
Reply-To: <Backforty at Blandranch.net>, TAPR APRS Mailing List
<aprssig at tapr.org>
Date: Wednesday, March 27, 2013 1:22 AM
To: TAPR APRS Mailing List <aprssig at tapr.org>
Subject: Re: [aprssig] Android can do analog APRS on 144.39
Wasn't there a QST article on this? -Chuck
On Tue, Mar 26, 2013 at 9:42 PM, Heikki Hannikainen <hessu at hes.iki.fi>
> On Tue, 26 Mar 2013, Kent Hufford wrote:
>> But since you are only doing APRS in Android, you are not doing analog
>> regular APRS on 144.39mhz either.
> Just a little plug: the APRSdroid application for Android has an analog APRS
> modem these days, you can wire it up to your HT from the speaker/mic jack and
> have it transmit *and* receive on 144.39.
> Most don't use it, but it can be done.
> - Hessu
> aprssig mailing list
> aprssig at tapr.org
_______________________________________________ aprssig mailing list
aprssig at tapr.org http://www.tapr.org/mailman/listinfo/aprssig
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the aprssig