[aprssig] D72/Bluetooth (was: Android can do analog APRS on 144.39)

Lynn W. Deffenbaugh (Mr) ldeffenb at homeside.to
Thu Mar 28 11:20:04 CDT 2013


The NMEA stream doesn't provide the full APRS packets, simply a waypoint 
to put a station on a map.

I want access to the internal TNC, just as I get on the D700/D710, so 
that a fully functional APRS client program can be connected to do 
messaging, telemetry, AND put fully-described APRS stations on the map 
(symbol, comment, application/hardware type and version, ...).

Isn't there a microcontroller out there that has built-in USB host 
support to which a cheap Bluetooth adapater could be mated and very thin 
firmware provided to bridge the serial data stream between the USB and 
the Bluetooth?  Of course, this will need to be in a pocketable form 
factor, possibly even sleeve-able to the D72 and maybe even draw power 
from there?

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 3/28/2013 12:07 PM, Tom Hayward wrote:
> On Thu, Mar 28, 2013 at 6:39 AM, Georg Lukas <georg at op-co.de> wrote:
>> Hey Herb,
>>
>> * Herb Gerhardt <hgerhardt at wavecable.com> [2013-03-28 00:25]:
>>> What I want is a Bluetooth connected to my TH-D72A that is able to
>>> communicate with my Samsung 5 Player or other Android device in order to
>>> plot the stations heard on the TH-D72A on a map on the Android device.
>> The major challenge here is probably to find a device that implements
>> USB host mode to interact with the D72A (or is there another way to
>> access its data port than USB?), and to forward it over Bluetooth.
>>
>> Once that is accomplished, the D72A needs to be configured to output
>> NMEA/PKWDWPL data over its serial port, and APRSdroid will happily parse
>> and display it on the map.
> One of us is missing something, because I don't think the two
> paragraphs above are dependent. The D72 has two data ports:
> - The USB device port enumerates as a serial port and offers memory
> programming, CAT, and raw TNC access.
> - The 2.5mm COM port offers NMEA GPS input and waypoint output.
>
> You could connect your Bluetooth serial adapter to the 2.5mm COM port
> and listen to NMEA waypoint output, just as you do with the D710.
>
>> * Kenwood D7x0 GPS port (sends out NMEA and displays stations on the map, experimental)
> Is this not possible? Maybe I misunderstood something.
>
> Tom KD7LXL
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> http://www.tapr.org/mailman/listinfo/aprssig
>



More information about the aprssig mailing list