[aprssig] Byonics GPS2OEM

Andrew Rich vk4tec at tech-software.net
Wed May 8 02:51:51 CDT 2013


Hello

I just did some measuring 

The GPS2OEM 

is 0 to 2.88 volts on TTL Yellow wire
is +/- 6 volts on RS232 Green wire 
Vcc is + 5.0 V

- Andrew - 


----- Original Message ----- 
From: "Andrew Rich" <vk4tec at tech-software.net>
To: "TAPR APRS Mailing List" <aprssig at tapr.org>
Sent: Tuesday, May 07, 2013 3:06 AM
Subject: Re: [aprssig] Byonics GPS2OEM


> Thank you 
> 
> Will find out and report back - maybe can add to byonics web site ?
> 
> - Andrew - 
> 
> ----- Original Message ----- 
> From: "Scott Miller" <scott at opentrac.org>
> To: "TAPR APRS Mailing List" <aprssig at tapr.org>
> Sent: Monday, May 06, 2013 8:58 AM
> Subject: Re: [aprssig] Byonics GPS2OEM
> 
> 
>>I think it's a SiRFstar III engine.  You should be able to find docs 
>> online.  Also, check out the sirfdemo application.
>> 
>> Scott
>> N1VG
>> 
>> On 5/6/2013 3:11 AM, Andrew Rich wrote:
>>> Anyone every sent commands to a Byonics GPS2OEM
>>> ?
>>>
>>> To affect the baud rate / NMEA sentences
>>>
>>> Andrew
>>>
>>> Sent from my iPhone
>>> Andrew Rich
>>> _______________________________________________
>>> aprssig mailing list
>>> aprssig at tapr.org
>>> http://www.tapr.org/mailman/listinfo/aprssig
>>>
>> _______________________________________________
>> aprssig mailing list
>> aprssig at tapr.org
>> http://www.tapr.org/mailman/listinfo/aprssig
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> http://www.tapr.org/mailman/listinfo/aprssig


More information about the aprssig mailing list