[aprssig] UTM grid (was: APRStt for SAR using...) Yes!

Greg Higgins gs.higgins at sbcglobal.net
Thu May 16 23:20:21 CDT 2013


Hate to disappoint you Bob, but you have bad information regarding SAR
groups. As of 2008, DHS / FEMA mandated ALL SAR groups to transition to
USNG. This had a lot to do with Hurricane Katrina and the large number of
SAR teams from around the country that responded that were using a
hodgepodge of different datum's that caused confusion and problems.

And your statement; " And all SAR folks are required by training to know how
to read a UTM grid map which they are *required* to use" was true until
2008. Now they are required to use USNG. The national USAR groups have
adopted USNG, it is incorporated in their training and DHS / FEMA have
courses available for training purposes.

The USNG Standard:
http://www.fgdc.gov/standards/projects/FGDC-standards-projects/usng/fgdc_std
_011_2001_usng.pdf

There is a lot of information available, Google it.

Greg Higgins
Paramedic / Firefighter / HazMat-WMD / Instructor

-----Original Message-----
From: aprssig-bounces at tapr.org [mailto:aprssig-bounces at tapr.org] On Behalf
Of Robert Bruninga
Sent: Thursday, May 16, 2013 5:48 PM
To: russo at bogodyn.org; TAPR APRS Mailing List
Subject: Re: [aprssig] UTM grid (was: APRStt for SAR using...) Yes!

Before this spins off to Fox News, remember the topic is simply that ALL SAR
groups in the USA use UTM grids and usually for routine position reporting
of their location in the field, they use a 3x3 digit report.  This is a
report to the nearest tenth of a km or about
100 meters.

Since APRStt is perfect as-is for reporting NUMBERS with DTMF, this topic is
only about how simply APRStt can be configured to allow SAR teams (without
APRS) to report in  using precedures they are already expert at using and
then having those positions automatically appear on the same APRS tactical
map as every one else.

And all SAR folks are required by training to know how to read a UTM grid
map which they are *required* to use.

And it is entirely local.  You want to use it, just do it.  You dont want to
use it, then good luck trying to get every single team outfited with a
working APRS tracker...

Bob, WBAPR

On Thu, May 16, 2013 at 10:54 AM, Tom Russo <russo at bogodyn.org> wrote:
> On Thu, May 16, 2013 at 03:03:10PM +0100, we recorded a bogon-computron
collision of the <steve at daniels270.eclipse.co.uk> flavor, containing:
>> I collected a lot of information a year or so ago, and if I recall 
>> you need the reference point and ellipsoid scale for each area.
>
> Given a geodetic datum (and WGS84 is sorta the standard for APRS 
> already), the ellipsiod is defined for all UTM zones in the same way.
>
> The globe is divided into 60 six-degree zones (numbered 1-60), 
> starting from 180W-174W as zone 1, increasing to the east.  The 
> central meridian of each zone is the reference point for each zone, and is
assigned a "false easting"
> of 500000m.  Once you've determined which 6-degree zone contains your 
> longitude, conversion from lat/lon to UTM in that zone is 
> straightforward based on the difference between that longitude and the 
> zone's central meridian, though the formulas are pretty hairy.
>
> UTM coordinates within a zone are always positive, and decrease going 
> west from 500000m at the central meridan, and increase to the east.  
> Since the zones are so large, it would be unnecessary for zone 
> information to be included in the strictly local APRStt input --- for 
> any given pair of northing and easting in the vicinity of the search, 
> there can be only one zone to which they would refer (even if the 
> search straddles a zone boundary, there would be no ambiguity --- low 
> valued eastings would be in the higher numbered zone, high valued 
> eastings in the lower).  One would simply need to code the local 
> APRStt system (which would presumably be temporary infrastructure anyway)
to do the math.
>
> The problem with this scheme of Bob's is that for it to work, field 
> resources still need a GPS to get either their UTM coordinates or 
> their Lat/Lon (depending on how one decides to set up APRStt).  Then 
> they need to type in those coordinates into a DTMF pad, just so they 
> can be on APRS, presumably so that those responsible for having full 
> incident situational awareness get the information.  And if they're 
> not using a GPS, but rather using crude map-based methods to pick off 
> coordinates, there is not much value to having them type in high-precision
UTM coordinates either.
>
> As one of the New Mexico State Police incident commanders for search 
> and rescue, I would see almost no benefit to asking teams to follow 
> this procedure over simply radioing their positions by voice on 
> request, and having our comms specialists at base enter the data into 
> APRS in the comfort of the incident communications center so it can be 
> shared around the incident management team easily.  We *already* have 
> them call in that information, and where we use APRS we do so to 
> *simplify* information transfer and decrease radio chatter, not add
complexity to team assignments.
>
> APRS in an automated portable tracker has a benefit both to incident 
> management (who get to see the data without pulling it constantly) and 
> to the deployed resource (who get to have that data pushed without 
> having their work assignments constantly interrupted to pull out a GPS 
> and read it off over the air).  APRStt sounds like the worst of both 
> worlds --- we still have to task field resources to do manual data 
> entry, still need to handle correcting broken manual data (usually by 
> calling back and getting clarification) AND it is using a technique 
> that is more time consuming and at least as error prone as relaying 
> coordinates by voice to a human sitting in front of a better data entry
system.
>
> This sounds like a solution desperately in search of a problem.  I 
> would rather see time and energy spent working to get better, lighter, 
> and more reliable two-way, automatic APRS devices into searcher's 
> hands.  Two-way devices tied to mapping GPS units allow not only 
> searchers to report their current locations to the IMT, but for 
> positional data to be transmitted back to them from the IMT (via 
> objects) to aid them in the completion of their assignments without adding
extra procedures for them to follow.
>
>> -----Original Message-----
>> From: aprssig-bounces at tapr.org [mailto:aprssig-bounces at tapr.org] On 
>> Behalf Of Lynn W. Deffenbaugh (Mr)
>> Sent: 16 May 2013 13:39
>> To: TAPR APRS Mailing List
>> Subject: [aprssig] UTM grid (was: APRStt for SAR using...)
>>
>> On 5/16/2013 7:45 AM, Robert Bruninga wrote:
>> > Now all I gotta do is refresh myself on the UTM grid to LATLONG
>> conversion.
>>
>> Copy me on what you learn because the last time I looked there isn't 
>> jsut one UTM grid, but several localized versions that use different 
>> reference points and conversion equations.
>
> --
> Tom Russo    KM5VY   SAR502   DM64ux          http://www.swcp.com/~russo/
> Tijeras, NM  QRPL#1592 K2#398  SOC#236
http://kevan.org/brain.cgi?DDTNM
>  echo "prpv_a'rfg_cnf_har_cvcr" | sed -e 's/_/ /g' | tr [a-m][n-z] 
> [n-z][a-m]
>
>
>
>
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> http://www.tapr.org/mailman/listinfo/aprssig
_______________________________________________
aprssig mailing list
aprssig at tapr.org
http://www.tapr.org/mailman/listinfo/aprssig



More information about the aprssig mailing list