[aprssig] THD72 and Raspberri Pi Igate
lee.bengston at gmail.com
Tue Nov 5 20:51:41 CST 2013
Either APRX or DIXPRS should work fine as an IGate on a Raspberry Pi.
deb packages for DIXPRS available via the following link:
The latest version 2.2.2 is the most desirable. Given the executable
portion of DIXPRS consists of python scripts, it does not need to be built
specifically for arm processors. If the intent is to use Linux AX25
networking, however, the deb package for PYAX25, which is also posted at
the same site, needs to be the one built for arm/RPi.
Lee - K5DAT
On Nov 5, 2013 2:41 PM, "John Gorkos" <jgorkos at gmail.com> wrote:
> Here¹s the latest APRX package compiled for Raspbian:
> I¹d just install that, get things set up, and away you go. FWIW, the D72
> is a lousy Igate radio. The biggest problem I have with mine is that it
> won¹t stay in KISS mode. It ³falls out² of KISS mode and needs to be
> I happen to have a Pi and a D72 sitting here on my desk. I¹ll set mine
> up and post what I did tomorrow.
> John Gorkos
> On 11/5/13, 3:25 PM, "Andrew P." <andrewemt at hotmail.com> wrote:
> >No reason why you shouldn't be able to, assuming the Pi has appropriate
> >Igate capable software installed on it. It already supports standard
> >USB-serial dongles (such as the one in the TH-D72), and has a full
> >Internet protocol stack for contacting the APRS-IS servers.
> >Who's got the best software for this environment? I'm afraid that my YAAC
> >program isn't the most efficient on the RPi platform for this.
> >Andrew Pavlin, KA2DDO
> >Sent from my Verizon Wireless BlackBerry
> >-----Original Message-----
> >From: Andrew Rich <vk4tec at tech-software.net>
> >Date: Tue, 5 Nov 2013 14:04:07
> >To: <aprssig at tapr.org>
> >Subject: [aprssig] THD72 and Raspberri Pi Igate
> >Is it possible to connect the Kenwood THD72 and a Raspberri Pi to make a
> >RX only igate ?
> >- Andrew -
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the aprssig