[aprssig] Dire Wolf & Tracker 3?

Andrew Rich vk4tec at tech-software.net
Sat Nov 23 16:55:11 CST 2013


Quick lesson in LINUX 

stty -F /dev/xxxxx show settings for that port
stty -F /dev/xxxxx 9600 ( set it to 9600 )
stty -F /dev/xxxxx -echo ( turn off echo ) 

I use minicom in LINUX to see if I can talk to the device first 

- Andrew - 

-----Original Message-----
From: aprssig-bounces at tapr.org [mailto:aprssig-bounces at tapr.org] On Behalf
Of qrv at kd4e.com
Sent: Sunday, 24 November 2013 5:30 AM
To: TAPR APRS Mailing List; tracker2 at yahoogroups.com; Xastir - APRS client
software discussion
Subject: Re: [aprssig] Dire Wolf & Tracker 3?

"ls /dev/ttyA*" produces:

"/dev/ttyACM0 /dev/ttyACM1"

The ACM0 is yellow, the ACM1 is blue.

No idea why the different colors.

> ax25 was apparently not installed, odd that neither Dire Wolf
> or xastir checked for the presence of ax25.
>
> Anyhow ...
>
> I installed ax25-tools, ax25-tools, ax25-xtools.
>
>  From Console "dmesg | grep ttyACM0" produces:
>
> "[   18.647282] cdc_acm 2-1:1.0: ttyACM0: USB ACM device"
>
> I believe that I need to run kissattach with ttyACM0 but
> am not sure from the dmesg output how to correctly do that.
>
> Help?
>
> Thanks!
>
> David



-- 

Thanks! & 73, KD4E.com

David Colburn - Nevils, Georgia USA

Search with: duckduckgo.com

Android for Hams: groups.yahoo.com/group/hamdroid
Creative Tech: groups.yahoo.com/group/ham-macguyver
Raspi Alternative: groups.yahoo.com/group/beagleboneblack/

Restored to design-spec at Heaven's gate 1Cor15:22
_______________________________________________
aprssig mailing list
aprssig at tapr.org
http://www.tapr.org/mailman/listinfo/aprssig



More information about the aprssig mailing list