[aprssig] Anyone Using SkyCommand with their TS-480? Or?
wd8arz at ix.netcom.com
Tue Oct 29 07:59:38 CDT 2013
Hello Matt nice to hear about your SkyCommand operation. The HT
interface must be interesting. Is it a home brew cable system?
The HT serial port to the hf rig needs to have the same com port baud
rate settings. Verify that and try using no PL's and see what that does.
Next challenge for me is to support APRS while doing SkyCommand in the
mobile. Looks like that will take a separate radio for that. If nothing
else, that puts your second D72 to work ... hi hi
Interesting to note the number of rigs that support Kenwoods wonderful
* HF Rigs: TS2000 series, TS-480 series, The TS570S, TS-870S and the
* Dual Banders: TMD700A, TMD710A, and RC-D710 Control Head, TM-V71A/E
with 2.10 Firmware.
* HT's: TH-79A KSS, THD7A and THD72A.
Another challenge of using a mode such as Kenwoods SkyCommand in a
mobile with a screwdriver auto tuner is there is only one db9 serial
connector on the radio. Most auto tuners need a serial cable on the hf
radio. The SkyCommand mode wants a serial cable on the hf radio.
The trick is to either use a long whip on the mobile with a none serial
cable tuner with memory features .... or now we have an option to
continue using the screwdriver antenna: West Mountain Radio's TARGETuner at
This auto tuner does not use a serial cable, but true swr input / output
so239 antenna connectors.
Have not ordered one, as I have it on a Christmas Wish List ... hi hi
73 from Bill - WD8ARZ
On 10/29/2013 8:24 AM, Matthew Willis wrote:
> I've used it with my TS-590 and a D710 as Transporter, with a D72 as Commander.
> I bought a second D72 with the intention of using it as the Transporter, but I haven't gotten that to work. I can't remember the exact reason, but it had to do with one of them not transmitting PL, or not decoding it. Either way it looked like a bug to me, but haven't gotten back to it.
More information about the aprssig