[aprssig] aprssig Digest, Vol 111, Issue 16

Steve Noskowicz noskosteve at yahoo.com
Sun Sep 22 10:08:22 CDT 2013


 
As a side note and possibly some help.  The D700 functions without a head attached *IF* you power it up with the Serial command to power it up.  If you tried that on the D710 and it still didn't power up and work, then it probably won't  If you didn't try that, it is worth a try.
 
  P.S.  I like that: "An error in the listing."  Yea, THE LISTING.  Might show up where you can't see the cut wires...

Sent from my KnightKit Crystal Set.
-- 
73, Steve, K9DCI   USN (Vet)  MOT (Ret)  Ham (Yet)
 
I served during the cold war, so you can continue to be served a cold one.
 
Up to date APRS Beginner Guide - updated Oct-2011
  http://K9DCI.home.comcast.net
    Click the APRS Beginner INFO link under Contact
 
Manage Radio Memories with an Excel Spreadsheet !
Click to tune. Click to capture Radio freq.
All Memories on one page. Cut, Copy, Paste, Print 'em...
For:
TM-D700 |      TH-F6A & F7    |   TS-2000    |   Icom 706MkIIG
All PMs |Real-time & memories | Sat mems too | Loads Mem Tones!
NOT D710|Also Kenwood.fx Files|TS-480 in Beta|
 
Laser Light show concepts coming in 2013.
 
Home Page:
  http://k9dci.home.comcast.net/ 


________________________________
 From: Jason Low <jay911 at gmail.com>
To: APRS Message Group <aprssig at tapr.org> 
Sent: Saturday, September 21, 2013 1:34 PM
Subject: Re: [aprssig] aprssig Digest, Vol 111, Issue 16
  


If you folks asking if it will work without the head, yes and no. If you mean without the ORIGINAL head, yes, it will - I replaced my busted-up (volume/squelch knobs bent and damaged) head with a new RC-D710 that I bought last year. I keep the damaged head to use as a TNC for various other projects like on my Maxtrac or with the interface kit, with any 2-pin (mic/sp) handheld.

If you mean will the D710 work without any head attached, you are correct, it will not function. It needs to have either the factory head or a RC-D710 on it. (I don't know about the head that comes with the 700.) 



On Sat, Sep 21, 2013 at 11:00 AM, <aprssig-request at tapr.org> wrote:

Send aprssig mailing list submissions to
>        aprssig at tapr.org
>
>To subscribe or unsubscribe via the World Wide Web, visit
>        http://www.tapr.org/mailman/listinfo/aprssig
>or, via email, send a message with subject or body 'help' to
>        aprssig-request at tapr.org
>
>You can reach the person managing the list at
>        aprssig-owner at tapr.org
>
>When replying, please edit your Subject line so it is more specific
>than "Re: Contents of aprssig digest..."
>
>
>Today's Topics:
>
>   1. Re: Anybody Missing a D710? (Lee Mushel)
>   2. Re: Anybody Missing a D710? (Erv Heimbuck)
>   3. Re: Anybody Missing a D710? (Charles Doughtie)
>   4. Re: Anybody Missing a D710? (Chuck Gooden)
>   5. Re: Anybody Missing a D710? (Steve Daniels)
>   6. Re: Anybody Missing a D710? (Steve Noskowicz)
>   7. Re: Anybody Missing a D710? (Brett Friermood)
>   8. Re: Anybody Missing a D710? (Lee Mushel)
>   9. Re: Anybody Missing a D710? (Charles Doughtie)
>
>
>----------------------------------------------------------------------
>
>Message: 1
>Date: Fri, 20 Sep 2013 16:33:36 -0600
>From: "Lee Mushel" <herbert3 at centurytel.net>
>To: "TAPR APRS Mailing List" <aprssig at tapr.org>
>Subject: Re: [aprssig] Anybody Missing a D710?
>Message-ID: <D322778D82964152951625437A5B7201 at NewComputer>
>Content-Type: text/plain; format=flowed; charset="UTF-8";
>        reply-type=original
>
>I put in a bid so that I could ask the seller a question.   This was done
>but he has not responded so far (ten hours)  and eBay still hasn't indicated
>that anyone has asked a question!   I think you are right about the smell!
>
>Lee   K9WRU
>----- Original Message -----
>From: "Keith VE7GDH" <ve7gdh at rac.ca>
>To: "TAPR APRS Mailing List" <aprssig at tapr.org>
>Sent: Friday, September 20, 2013 9:42 AM
>Subject: Re: [aprssig] Anybody Missing a D710?
>
>
>> Bob WB4APR wrote?
>>
>>> Unfortunately, the APRS callsign is in the control head, not the radio so
>>> it is not traceable that way?
>>
>> Hopefully a licensed amateur radio operator will purchase it and get the
>> serial number to the authorities and major dealers and see if it has been
>> reported stolen. I could think of a few reasons why the body could end up
>> for sale, but do agree that it sounds fishy.
>>
>> 73 Keith VE7GDH
>> _______________________________________________
>> aprssig mailing list
>> aprssig at tapr.org
>> http://www.tapr.org/mailman/listinfo/aprssig
>>
>>
>
>
>
>
>------------------------------
>
>Message: 2
>Date: Fri, 20 Sep 2013 14:50:27 -0700
>From: "Erv Heimbuck" <erv at heimbuck.com>
>To: "'TAPR APRS Mailing List'" <aprssig at tapr.org>
>Subject: Re: [aprssig] Anybody Missing a D710?
>Message-ID: <028901ceb64b$6da7a9b0$48f6fd10$@com>
>Content-Type: text/plain;       charset="UTF-8"
>
>I also asked a question that has been ignored so far
>
>Erv K0OTZ
>
>
>
>
>------------------------------
>
>Message: 3
>Date: Fri, 20 Sep 2013 15:05:17 -0700 (PDT)
>From: Charles Doughtie <n5exy at yahoo.com>
>To: TAPR APRS Mailing List <aprssig at tapr.org>
>Subject: Re: [aprssig] Anybody Missing a D710?
>Message-ID:
>        <1379714717.45027.YahooMailNeo at web142601.mail.bf1.yahoo.com>
>Content-Type: text/plain; charset="iso-8859-1"
>
>What is being asked? Perhaps all of us could "saturate the target" with the same questions - - -
>
>Works and is in good condition. Wonder if there are any mods - - -
>
>
>?
>de Charlie, N5EXY, Grid EM10fl,
>South Suburban Greater Hutto
>
>
>
>
>
>
>________________________________
> From: Erv Heimbuck <erv at heimbuck.com>
>To: 'TAPR APRS Mailing List' <aprssig at tapr.org>
>Sent: Friday, September 20, 2013 4:50 PM
>Subject: Re: [aprssig] Anybody Missing a D710?
>
>
>I also asked a question that has been ignored so far
>
>Erv K0OTZ
>
>
>_______________________________________________
>aprssig mailing list
>aprssig at tapr.org
>http://www.tapr.org/mailman/listinfo/aprssig
>-------------- next part --------------
>An HTML attachment was scrubbed...
>URL: <http://www.tapr.org/pipermail/aprssig/attachments/20130920/866d2e5c/attachment-0001.html>
>
>------------------------------
>
>Message: 4
>Date: Fri, 20 Sep 2013 17:21:23 -0500
>From: Chuck Gooden <Chuck.Gooden at comcast.net>
>To: aprssig at tapr.org
>Subject: Re: [aprssig] Anybody Missing a D710?
>Message-ID: <523CCA63.3020409 at comcast.net>
>Content-Type: text/plain; charset=UTF-8; format=flowed
>
>
>Will it even work without the head?  I thought the THD700 had to have
>both the base and the head to function.  I assume the D710 would be the
>same.
>
>Really nice soldering job on the fuse though.
>
>
>On 9/20/2013 5:33 PM, Lee Mushel wrote:
>> I put in a bid so that I could ask the seller a question.   This was
>> done but he has not responded so far (ten hours)  and eBay still
>> hasn't indicated that anyone has asked a question!   I think you are
>> right about the smell!
>>
>> Lee   K9WRU
>> ----- Original Message ----- From: "Keith VE7GDH" <ve7gdh at rac.ca>
>> To: "TAPR APRS Mailing List" <aprssig at tapr.org>
>> Sent: Friday, September 20, 2013 9:42 AM
>> Subject: Re: [aprssig] Anybody Missing a D710?
>>
>>
>>> Bob WB4APR wrote?
>>>
>>>> Unfortunately, the APRS callsign is in the control head, not the
>>>> radio so it is not traceable that way?
>>>
>>> Hopefully a licensed amateur radio operator will purchase it and get
>>> the serial number to the authorities and major dealers and see if it
>>> has been reported stolen. I could think of a few reasons why the body
>>> could end up for sale, but do agree that it sounds fishy.
>>>
>>> 73 Keith VE7GDH
>>> _______________________________________________
>>> aprssig mailing list
>>> aprssig at tapr.org
>>> http://www.tapr.org/mailman/listinfo/aprssig
>>>
>>>
>>
>>
>> _______________________________________________
>> aprssig mailing list
>> aprssig at tapr.org
>> http://www.tapr.org/mailman/listinfo/aprssig
>
>
>
>------------------------------
>
>Message: 5
>Date: Fri, 20 Sep 2013 23:24:35 +0100
>From: "Steve Daniels" <steve at daniels270.eclipse.co.uk>
>To: "'Charles Doughtie'" <n5exy at yahoo.com>,     "'TAPR APRS Mailing List'"
>        <aprssig at tapr.org>
>Subject: Re: [aprssig] Anybody Missing a D710?
>Message-ID: <8A8F9A5EE6A14B39B431ABD6AF737BBE at stevePC>
>Content-Type: text/plain; charset="us-ascii"
>
>I don't see anything much out of the ordinary, ok missing front panel is a
>bit odd, but not the cut cables so much.
>
>Used to work making 4cx250 tubes, so I could query the 4cx350 he has on
>offer, I know more than any sane person needs to no about those.
>
>
>
>As an aside I have several air cooled and conduction cooled 2C39's if anyone
>wants them, free to a good home.
>
>
>
>Steve Daniels
>
>Amateur Radio Callsign G6UIM
>
>Torbay Freecycle  Owner
>
>http://uk.groups.yahoo.com/group/torbay_freecycle
>
>APRSISCE/32 Beta tester and WIKI editor http://aprsisce.wikidot.com/
>
>
>
>  _____
>
>From: aprssig-bounces at tapr.org [mailto:aprssig-bounces at tapr.org] On Behalf
>Of Charles Doughtie
>Sent: 20 September 2013 23:05
>To: TAPR APRS Mailing List
>Subject: Re: [aprssig] Anybody Missing a D710?
>
>
>
>What is being asked? Perhaps all of us could "saturate the target" with the
>same questions - - -
>
>Works and is in good condition. Wonder if there are any mods - - -
>
>
>
>
>
>de Charlie, N5EXY, Grid EM10fl,
>South Suburban Greater Hutto
>
>
>
>
>
>
>
>
>  _____
>
>From: Erv Heimbuck <erv at heimbuck.com>
>To: 'TAPR APRS Mailing List' <aprssig at tapr.org>
>Sent: Friday, September 20, 2013 4:50 PM
>Subject: Re: [aprssig] Anybody Missing a D710?
>
>
>I also asked a question that has been ignored so far
>
>Erv K0OTZ
>
>
>_______________________________________________
>aprssig mailing list
>aprssig at tapr.org
>http://www.tapr.org/mailman/listinfo/aprssig
>
>
>
>-------------- next part --------------
>An HTML attachment was scrubbed...
>URL: <http://www.tapr.org/pipermail/aprssig/attachments/20130920/9978c752/attachment-0001.html>
>
>------------------------------
>
>Message: 6
>Date: Fri, 20 Sep 2013 16:18:46 -0700 (PDT)
>From: Steve Noskowicz <noskosteve at yahoo.com>
>To: TAPR APRS Mailing List <aprssig at tapr.org>
>Subject: Re: [aprssig] Anybody Missing a D710?
>Message-ID:
>        <1379719126.28279.YahooMailNeo at web140606.mail.bf1.yahoo.com>
>Content-Type: text/plain; charset="iso-8859-1"
>
>From: Chuck Gooden <Chuck.Gooden at comcast.net>
>?
>>? Will it even work without the head?? I thought the THD700 had to have
>>? both the base and the head to function.? I assume the D710 would be the
>>? same.
>
>? FYI:? The D700 CAN be operated WITHOUT a control head, via the Serial port.? I've done it.? My Excel workbook for the D700 does it just fine.
>?? http://k9dci.home.comcast.net/site/?/page/Amateur_Radio_Control/?
>
>I don't own a D710 so I can't try it.
>--
>73, Steve, K9DCI
>-------------- next part --------------
>An HTML attachment was scrubbed...
>URL: <http://www.tapr.org/pipermail/aprssig/attachments/20130920/9d66e67e/attachment-0001.html>
>
>------------------------------
>
>Message: 7
>Date: Fri, 20 Sep 2013 19:37:33 -0500
>From: Brett Friermood <brett.friermood at gmail.com>
>To: TAPR APRS Mailing List <aprssig at tapr.org>
>Subject: Re: [aprssig] Anybody Missing a D710?
>Message-ID:
>        <mailto:CADS0AtS5H3vQwNuL1DtC7uFoEMJuxWy3pPQt_M1D%2BtnLjmvbwA at mail.gmail.com>
>Content-Type: text/plain; charset="windows-1252"
>
>No, I don't believe so. My V71a, which is the same body just a different
>head, will not function without a connection to the head. I found this out
>last weekend when the radio would not turn on after moving a cable bundle.
>Turns out my control head wiring has a flakey connection which needs to
>reworked.
>
>Granted I was not computer controlling it right then, but until the head
>was properly connected the start-up beep would not occur.
>
>Brett KQ9N
>On Sep 20, 2013 5:21 PM, "Chuck Gooden" <Chuck.Gooden at comcast.net> wrote:
>
>>
>> Will it even work without the head?  I thought the THD700 had to have both
>> the base and the head to function.  I assume the D710 would be the same.
>>
>> Really nice soldering job on the fuse though.
>>
>>
>> On 9/20/2013 5:33 PM, Lee Mushel wrote:
>>
>>> I put in a bid so that I could ask the seller a question.   This was done
>>> but he has not responded so far (ten hours)  and eBay still hasn't
>>> indicated that anyone has asked a question!   I think you are right about
>>> the smell!
>>>
>>> Lee   K9WRU
>>> ----- Original Message ----- From: "Keith VE7GDH" <ve7gdh at rac.ca>
>>> To: "TAPR APRS Mailing List" <aprssig at tapr.org>
>>> Sent: Friday, September 20, 2013 9:42 AM
>>> Subject: Re: [aprssig] Anybody Missing a D710?
>>>
>>>
>>>  Bob WB4APR wrote?
>>>>
>>>>  Unfortunately, the APRS callsign is in the control head, not the radio
>>>>> so it is not traceable that way?
>>>>>
>>>>
>>>> Hopefully a licensed amateur radio operator will purchase it and get the
>>>> serial number to the authorities and major dealers and see if it has been
>>>> reported stolen. I could think of a few reasons why the body could end up
>>>> for sale, but do agree that it sounds fishy.
>>>>
>>>> 73 Keith VE7GDH
>>>> ______________________________**_________________
>>>> aprssig mailing list
>>>> aprssig at tapr.org
>>>> http://www.tapr.org/mailman/**listinfo/aprssig<http://www.tapr.org/mailman/listinfo/aprssig>
>>>>
>>>>
>>>>
>>>
>>> ______________________________**_________________
>>> aprssig mailing list
>>> aprssig at tapr.org
>>> http://www.tapr.org/mailman/**listinfo/aprssig<http://www.tapr.org/mailman/listinfo/aprssig>
>>>
>>
>> ______________________________**_________________
>> aprssig mailing list
>> aprssig at tapr.org
>> http://www.tapr.org/mailman/**listinfo/aprssig<http://www.tapr.org/mailman/listinfo/aprssig>
>>
>-------------- next part --------------
>An HTML attachment was scrubbed...
>URL: <http://www.tapr.org/pipermail/aprssig/attachments/20130920/c7b8900b/attachment-0001.html>
>
>------------------------------
>
>Message: 8
>Date: Fri, 20 Sep 2013 20:26:27 -0600
>From: "Lee Mushel" <herbert3 at centurytel.net>
>To: "TAPR APRS Mailing List" <aprssig at tapr.org>
>Subject: Re: [aprssig] Anybody Missing a D710?
>Message-ID: <8BEA381E232640E9864841861F6E6419 at NewComputer>
>Content-Type: text/plain; format=flowed; charset="utf-8";
>        reply-type=response
>
>Gentlemen:
>
>eBay cancelled my bid at 6:39.   someone must have told them it was a stolen
>item.
>
>73
>
>Lee  K9WRU
>----- Original Message -----
>From: "Chuck Gooden" <Chuck.Gooden at comcast.net>
>To: <aprssig at tapr.org>
>Sent: Friday, September 20, 2013 4:21 PM
>Subject: Re: [aprssig] Anybody Missing a D710?
>
>
>>
>> Will it even work without the head?  I thought the THD700 had to have both
>> the base and the head to function.  I assume the D710 would be the same.
>>
>> Really nice soldering job on the fuse though.
>>
>>
>> On 9/20/2013 5:33 PM, Lee Mushel wrote:
>>> I put in a bid so that I could ask the seller a question.   This was done
>>> but he has not responded so far (ten hours)  and eBay still hasn't
>>> indicated that anyone has asked a question!   I think you are right about
>>> the smell!
>>>
>>> Lee   K9WRU
>>> ----- Original Message ----- From: "Keith VE7GDH" <ve7gdh at rac.ca>
>>> To: "TAPR APRS Mailing List" <aprssig at tapr.org>
>>> Sent: Friday, September 20, 2013 9:42 AM
>>> Subject: Re: [aprssig] Anybody Missing a D710?
>>>
>>>
>>>> Bob WB4APR wrote?
>>>>
>>>>> Unfortunately, the APRS callsign is in the control head, not the radio
>>>>> so it is not traceable that way?
>>>>
>>>> Hopefully a licensed amateur radio operator will purchase it and get the
>>>> serial number to the authorities and major dealers and see if it has
>>>> been reported stolen. I could think of a few reasons why the body could
>>>> end up for sale, but do agree that it sounds fishy.
>>>>
>>>> 73 Keith VE7GDH
>>>> _______________________________________________
>>>> aprssig mailing list
>>>> aprssig at tapr.org
>>>> http://www.tapr.org/mailman/listinfo/aprssig
>>>>
>>>>
>>>
>>>
>>> _______________________________________________
>>> aprssig mailing list
>>> aprssig at tapr.org
>>> http://www.tapr.org/mailman/listinfo/aprssig
>>
>> _______________________________________________
>> aprssig mailing list
>> aprssig at tapr.org
>> http://www.tapr.org/mailman/listinfo/aprssig
>>
>>
>
>
>
>
>------------------------------
>
>Message: 9
>Date: Fri, 20 Sep 2013 18:54:41 -0700 (PDT)
>From: Charles Doughtie <n5exy at yahoo.com>
>To: TAPR APRS Mailing List <aprssig at tapr.org>
>Subject: Re: [aprssig] Anybody Missing a D710?
>Message-ID:
>        <1379728481.6299.YahooMailNeo at web142602.mail.bf1.yahoo.com>
>Content-Type: text/plain; charset="utf-8"
>
>""This listing was ended by the seller because there was an error in the listing.""
>
>?
>de Charlie, N5EXY, Grid EM10fl,
>South Suburban Greater Hutto
>
>
>
>
>
>________________________________
> From: Lee Mushel <herbert3 at centurytel.net>
>To: TAPR APRS Mailing List <aprssig at tapr.org>
>Sent: Friday, September 20, 2013 9:26 PM
>Subject: Re: [aprssig] Anybody Missing a D710?
>
>
>Gentlemen:
>
>eBay cancelled my bid at 6:39.?  someone must have told them it was a stolen
>item.
>
>73
>
>Lee? K9WRU
>----- Original Message -----
>From: "Chuck Gooden" <Chuck.Gooden at comcast.net>
>To: <aprssig at tapr.org>
>Sent: Friday, September 20, 2013 4:21 PM
>Subject: Re: [aprssig] Anybody Missing a D710?
>
>
>>
>> Will it even work without the head?? I thought the THD700 had to have both
>> the base and the head to function.? I assume the D710 would be the same.
>>
>> Really nice soldering job on the fuse though.
>>
>>
>> On 9/20/2013 5:33 PM, Lee Mushel wrote:
>>> I put in a bid so that I could ask the seller a question.?  This was done
>>> but he has not responded so far (ten hours)? and eBay still hasn't
>>> indicated that anyone has asked a question!?  I think you are right about
>>> the smell!
>>>
>>> Lee?  K9WRU
>>> ----- Original Message ----- From: "Keith VE7GDH" <ve7gdh at rac.ca>
>>> To: "TAPR APRS Mailing List" <aprssig at tapr.org>
>>> Sent: Friday, September 20, 2013 9:42 AM
>>> Subject: Re: [aprssig] Anybody Missing a D710?
>>>
>>>
>>>> Bob WB4APR wrote?
>>>>
>>>>> Unfortunately, the APRS callsign is in the control head, not the radio
>>>>> so it is not traceable that way?
>>>>
>>>> Hopefully a licensed amateur radio operator will purchase it and get the
>>>> serial number to the authorities and major dealers and see if it has
>>>> been reported stolen. I could think of a few reasons why the body could
>>>> end up for sale, but do agree that it sounds fishy.
>>>>
>>>> 73 Keith VE7GDH
>>>> _______________________________________________
>>>> aprssig mailing list
>>>> aprssig at tapr.org
>>>> http://www.tapr.org/mailman/listinfo/aprssig
>>>>
>>>>
>>>
>>>
>>> _______________________________________________
>>> aprssig mailing list
>>> aprssig at tapr.org
>>> http://www.tapr.org/mailman/listinfo/aprssig
>>
>> _______________________________________________
>> aprssig mailing list
>> aprssig at tapr.org
>> http://www.tapr.org/mailman/listinfo/aprssig
>>
>>
>
>
>_______________________________________________
>aprssig mailing list
>aprssig at tapr.org
>http://www.tapr.org/mailman/listinfo/aprssig
>-------------- next part --------------
>An HTML attachment was scrubbed...
>URL: <http://www.tapr.org/pipermail/aprssig/attachments/20130920/dac49714/attachment-0001.html>
>
>------------------------------
>
>_______________________________________________
>aprssig mailing list
>aprssig at tapr.org
>http://www.tapr.org/mailman/listinfo/aprssig
>
>
>End of aprssig Digest, Vol 111, Issue 16
>****************************************
>
 
_______________________________________________
aprssig mailing list
aprssig at tapr.org
http://www.tapr.org/mailman/listinfo/aprssig
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tapr.org/pipermail/aprssig/attachments/20130922/e79f13ef/attachment.html>


More information about the aprssig mailing list