[aprssig] Debugging APRS clients with socat and tnc-server

John KB2SCS kb2scs at optonline.net
Sun Aug 10 16:54:35 CDT 2014


Hi Christopher
               I have always used the hardware method of
connect two APRS clients together.
The hardware method needs the following hardware.
Two Computers.
Two TNC

You simply connect the radio port of the two Tnc together.
Obviously connecting the correct pin to the correct pin on the other 
radio port.

Then just connect the computers to the serial ports of the two TNC.


Christopher Snell wrote:
> I recently needed to debug an APRS client that I'm working on and 
> needed a way to do it without using RF.  Simply attaching the client 
> to a KISS TNC and a radio wasn't cutting it for me: I needed to 
> carefully control the packets that were being sent to the client and I 
> needed to send packets at a faster rate than would be desirable on the 
> local RF network. You can do this with a null-modem cable between two 
> RS-232 ports but if you don't have two ports and a cable handy, 
> there's an easier way.
>
> If you're a developer of an APRS client or utility, you might find 
> this useful.  I did a write-up on the process:
>
> http://output.chrissnell.com/post/94364500380/debugging-aprs-clients-with-a-virtual-null-modem-cable
>
> Chris
> NW5W
>
>
>
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> http://www.tapr.org/mailman/listinfo/aprssig

-- 
Let us hope we never witness the "Silence Of The Hams"
73 DE John KB2SCS
            Packet:    KB2SCS at WA2PNU,#NLI.NY.USA.NOAM
            E-Mail:    kb2scs at arrl.net
            Web Page:  http://www.qsl.net/kb2scs

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tapr.org/pipermail/aprssig/attachments/20140810/58d6bc7c/attachment.html>


More information about the aprssig mailing list