[aprssig] TM-D710 control
noskosteve at yahoo.com
Tue Feb 25 21:33:24 CST 2014
This appears to be the most recent command listing by Kai and a few others.
It looks like for the VFO, it is either FO or PV depending how you want to do it.
LA3QMA Kai Gunter Brandt has the info:
73, Steve, K9DCI
From: Andrew Rich <vk4tec at tech-software.net>
To: TAPR APRS Mailing List <aprssig at tapr.org>
Sent: Tuesday, February 25, 2014 3:21 PM
Subject: Re: [aprssig] TM-D710 control
I can not get the d710 to do any command other than tnc via the head
Also d710 group confirms d710 freq is set via body
What is freq command ? Read or set
Sent from my iPhone
On 26 Feb 2014, at 8:09 am, Tony VE6MVP <tony at ve6mvp.com> wrote:
At 01:44 PM 2014-02-24, Andrew Rich wrote:
>>+ The radio body port is for freq etc
>>+ The head port is for TNC
>No, it's not that simple. The radio body com port is for updating
the radio body firmware and the memory. The head com port is
for updating the control head firmware, TNC settings, and current A and B
side radio settings including frequency, offset and tone.
And, of course, send and receiving data packets..
>aprssig mailing list
>aprssig at tapr.org
aprssig mailing list
aprssig at tapr.org
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the aprssig