[aprssig] Low Alt aircraft path

Christopher Snell chris.snell at gmail.com
Wed Jul 16 17:20:55 CDT 2014


I can't speak for the MT-AIO but I know that the Argent Data trackers have
profiles that can be used to change path settings based on altitude,
position, etc.:

http://wiki.argentdata.com/index.php?title=Scripting

Chris
NW5W


On Wed, Jul 16, 2014 at 2:57 PM, Randy Allen <ka0azs at earthlink.net> wrote:

> I have a ham friend with a MT-AIO that he wants to use in his airplane.
>  He states he usually operates at 1-2,000 Ft AGL.  We have discussed the
> issues that have come up with high altitude balloons.  He understands to
> NOT have WIDE1-1 in the path for this application.
>
> His research is pointing him to WIDE2-1.  Given the number of Digi's in
> the area, I wonder how no path would work.
>
> One of his concerns is that some of the small airports he uses away from
> home are in areas without Digi coverage at ground level and thinks that no
> path would not allow him to get a packet out when landed and parked.
>
> I have suggested programming each configuration available to him with a
> WIDE2-1 and no path.
>
> Comments, suggestions?
>
> Thanks in advance
>
> 73
>
> --
> Randy Allen, KAØAZS
>
> ---
> This email is free from viruses and malware because avast! Antivirus
> protection is active.
> http://www.avast.com
>
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> http://www.tapr.org/mailman/listinfo/aprssig
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tapr.org/pipermail/aprssig/attachments/20140716/367aeb18/attachment.html>


More information about the aprssig mailing list