[aprssig] Low Alt aircraft path
cap at cruzio.com
Wed Jul 16 17:43:36 CDT 2014
I know it is “APRS blasphemy” to suggest this, but we have found that for airplane travelers in California, a digipath of only WIDE1-1 at a conservative timed interval (like once every 2 minutes) does the trick best, around airports and at altitude.
73, Cap KE6AFE
From: aprssig-bounces at tapr.org [mailto:aprssig-bounces at tapr.org] On Behalf Of Christopher Snell
Sent: Wednesday, July 16, 2014 3:21 PM
To: TAPR APRS Mailing List
Subject: Re: [aprssig] Low Alt aircraft path
I can't speak for the MT-AIO but I know that the Argent Data trackers have profiles that can be used to change path settings based on altitude, position, etc.:
On Wed, Jul 16, 2014 at 2:57 PM, Randy Allen <ka0azs at earthlink.net <mailto:ka0azs at earthlink.net> > wrote:
I have a ham friend with a MT-AIO that he wants to use in his airplane. He states he usually operates at 1-2,000 Ft AGL. We have discussed the issues that have come up with high altitude balloons. He understands to NOT have WIDE1-1 in the path for this application.
His research is pointing him to WIDE2-1. Given the number of Digi's in the area, I wonder how no path would work.
One of his concerns is that some of the small airports he uses away from home are in areas without Digi coverage at ground level and thinks that no path would not allow him to get a packet out when landed and parked.
I have suggested programming each configuration available to him with a WIDE2-1 and no path.
Thanks in advance
Randy Allen, KAØAZS
This email is free from viruses and malware because avast! Antivirus protection is active.
aprssig mailing list
aprssig at tapr.org <mailto:aprssig at tapr.org>
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the aprssig