[aprssig] IGate issue

Andrew Rich vk4tec at tech-software.net
Mon Mar 17 21:50:05 CDT 2014


Hello

 

If you have a problem with the APRS-IS

 

Just telnet from a command prompt and try your commands user pass filter 

 

telnet rotate.aprs.net 14580

user <callsign> pass <passcode>

#filter p/VK ( as an example ) 

 

- Andrew - 

 

  _____  

From: aprssig-bounces at tapr.org [mailto:aprssig-bounces at tapr.org] On Behalf
Of Boardman, Bruce
Sent: Tuesday, 18 March 2014 1:17 PM
To: TAPR APRS Mailing List
Subject: Re: [aprssig] IGate issue

 

Andrew,

 

When you say passcode, I did need a new registration number, and from that I
got a new Validation number which I have entered into IU View under "APRS
server setup". It is connected to the tier 2 server OK. Have a look at my
Igate and you will see its working but no liost like it used to have.
Thanks.

 

Regards, 

Bruce Boardman 
Telstra - Network & Access Technologies 

cid:image004.jpg at 01CC7EAD.B69AEBF0

 <tt:0285767011?Dial> Ph (02) 8576 7011 
Mob 0427 755 678 
Telstra Depot
Lot2/ 44-58 Duhig St,

Harristown QLD 4350 

 

From: aprssig-bounces at tapr.org [mailto:aprssig-bounces at tapr.org] On Behalf
Of Andrew P.
Sent: Tuesday, 18 March 2014 11:51 AM
To: TAPR APRS Mailing List
Subject: Re: [aprssig] IGate issue

 

Did you change your passcode? You changed your callsign, so you will need a
new APRS-IS passcode corresponding to the new callsign.

Contact the author of the software you are using for a new passcode if you
don't have one already.

Andrew Pavlin, KA2DDO
author of YAAC
http://www.ka2ddo.org/ka2ddo/YAAC.html

  _____  

From: Bruce.Boardman at team.telstra.com
To: aprssig at tapr.org
Date: Tue, 18 Mar 2014 12:45:46 +1100
Subject: [aprssig] IGate issue

Hi,

I recently changed address (to a different state in Australia) and this
necessitated a callsign change. My Igate is now VK4MQ-5 (used to be
VK2ZZM-5).

 

http://aprs.fi/info/a/VK4MQ-5

 

Since the change I am passing packets RF to internet OK, but I don't have a
"stations heard by" list any more. Also my graphs show nothing. I tried
firing up my mobile tracker on 10MHz so that only my Igate could hear it,
and the packets pass OK but still no list. Other mobile stations are passing
info to me which I can see from their raw packets. 

Looks like an APRS server problem to me, as I have confirmed all my UI View
settings?? Any advice please?

 

 

Regards, 

Bruce Boardman 

 


_______________________________________________ aprssig mailing list
aprssig at tapr.org http://www.tapr.org/mailman/listinfo/aprssig

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tapr.org/pipermail/aprssig/attachments/20140318/54698014/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.jpg
Type: image/jpeg
Size: 925 bytes
Desc: not available
URL: <http://www.tapr.org/pipermail/aprssig/attachments/20140318/54698014/attachment.jpg>


More information about the aprssig mailing list