[aprssig] Igate Symbol

Tim N8DEU n8deu at outlook.com
Fri Aug 7 17:43:57 CDT 2015


Max,

A digi with an Igate is not defined. My 2-way Igate is also a digi and I used the T overlayed on the gateway symbol. The reason I did this is it is primarily an Igate that also happens to be a digipeater. Since the primary goal of most stations is to use a path to reach an Igate, then identifying as a digi did not make sense in my case. Although you raise a valid point, I do not believe the configuration you mentioned is defined and documented.
.


Tim - N8DEU

Sent from my Windows Phone
________________________________
From: Max Harper via aprssig<mailto:aprssig at tapr.org>
Sent: ‎8/‎7/‎2015 1:54 PM
To: Patrick Moyer<mailto:patrickcmoyer at gmail.com>; TAPR APRS Mailing List<mailto:aprssig at tapr.org>
Subject: Re: [aprssig] Igate Symbol

That page doesn't say anything about digis with an igate, otherwise I would use an S overlay.
Max KG4PID
       From: Patrick Moyer via aprssig <aprssig at tapr.org>
 To: Bruce W. Martin <aprs at almostanywhere.com>; TAPR APRS Mailing List <aprssig at tapr.org>
 Sent: Friday, August 7, 2015 1:26 PM
 Subject: Re: [aprssig] Igate Symbol


According to this  http://www.aprs.org/newN/n-n-overlays.txt  all New n-N Digis should have a S or L overlay.

PatW3RGA
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tapr.org/pipermail/aprssig/attachments/20150807/54843c6b/attachment.html>
-------------- next part --------------
_______________________________________________
aprssig mailing list
aprssig at tapr.org
http://www.tapr.org/mailman/listinfo/aprssig


More information about the aprssig mailing list