[aprssig] Green light labs gps
aprssigZbr6 at acarver.net
Fri Aug 28 00:32:12 CDT 2015
This page at the bottom lists the pinout of the 710 display head jack.
Pin one, when looking at an RJ45 plug, would be on the left if you have
the retention clip facing away from you and the contacts pointing up
(cable hanging down). Verify multiple times, of course, before plugging
anything in. You'll also have to verify that the short cable from the
GPS (the one that goes from the GPS around to the display when it's
mounted) has a one-to-one mapping of the pins (it's possible for them to
have rolled the wires making the pins cross over, again verify).
On 2015-08-27 19:46, Dale Urban via aprssig wrote:
> I have a green light labs gps that I used on my Kenwood D-710. I would like to use it on my D-700 so I would need to supply power through the RJ-45 jack. Would anyone know what the pinout is of the RJ- 45 jack on this gps and which pin is pin 1 and pin 8 Thanks Dale N0KQX
More information about the aprssig