[aprssig] X-BEE wireless modules?

Steve Noskowicz noskosteve at yahoo.com
Fri Aug 28 18:58:04 CDT 2015


Correct, PWM.  
I've used Digi International modules and have a couple as a serial link to my D700.  It is not the VSC that John Hansen sells to hams, but a Development kit from Digi International.

>From the: "XBee Cookbook Issue 1.4 for Series 1 (Freescale) with 802.15.4 Firmware"

2.2.6 Analog Outputs
The PWM period is 64μS, and there are 1023 (0x3ff) steps within it. To put that another way, the PWM outputs deliver a square wave at a frequency of about 15.6KHz with a duty cycle that can be varied in 1024 steps between 0% and 100%.

Digi International has some very good reference docs.

-- 
Regards, Steve Noskowicz
Science & Technical Advisor
http://www.challengerillinois.org/

--------------------------------------------
On Fri, 8/28/15, Jason KG4WSV via aprssig <aprssig at tapr.org> wrote:

 Subject: Re: [aprssig] X-BEE wireless modules?
 To: "Robert Bruninga" <bruninga at usna.edu>, "TAPR APRS Mailing List" <aprssig at tapr.org>
 Date: Friday, August 28, 2015, 6:41 PM
 
 
 > On Aug 28, 2015, at 5:31 PM, Robert
 Bruninga via aprssig <aprssig at tapr.org>
 wrote:
 > 
 > Is there a mode where the INPUT analog voltages on the A/D pins on one module just appear as OUTPUT analog voltages out on the identical A/D pins of the other module?  In other words, a wirelss transfer of several analog voltages transparently?
 
 IIRC
 I've seen exactly such an example for a single channel using a pot and LED. Of course the "analog" output
 is actually pwm.
 
 I think it
 was on the Digi web site. Google will probably find it for
 you as that's how I stumbled across it. 
 
 Jason
 kg4wsv
 
 _______________________________________________
 aprssig mailing list
 aprssig at tapr.org
 http://www.tapr.org/mailman/listinfo/aprssig
 


More information about the aprssig mailing list