[aprssig] The future of APRS. (Was Re: weak signal ISS packet)
g8kbvdave at googlemail.com
Wed Jan 14 04:10:30 CST 2015
From: Steve Dimse <steve at dimse.com>
> On Jan 13, 2015, at 4:43 AM, Dave B <g8kbvdave at googlemail.com> wrote:
> > why the heck are we
> > not moving Packet/APRS forward to use faster but robust modulation
> > schemes and methods?
> I can think of three reasons offhand. First, though far from perfect
> and farther from state-of-the-art, the system works for most people
> most of the time.
Most is not all. (But nothing is 100%)
> Second, it is far easier to create a new system and attract users than
> to entice people to switch to an incompatible system. That's why
> Windows is still around.
Irrelevant. We're not comparing OS's.
Windows is still about, because it's pre-installed on just about every desktop and
laptop PC you buy from the mainstream retailers, and the business support (IT)
trade is entrenched in it, it's a cash cow to put it bluntly.
> The third you gave yourself: "I wish I knew how to do that sort of
> stuff myself." Implicit in this answer is "and I'm not going to learn
> how". Maybe you aren't smart enough to learn how, but I doubt that.
> Instead, you have things that are more important or that interest you
> more, and you choose not to learn how.
I still work for a living (I can't afford not to) and have a family life. There are
not enough of, "the right sort of contiguious hours" in a day as it is.
I can learn (and still do!) But it takes time, and though I know some of the
basics of DSP, I know pitifully little about how to code the stuff. (For whatever
reason, I have a mental block regarding threaded programming, and "streams".)
Maybe when I retire, if the Government ever let me retire that is.
> No one makes money on APRS development. We do things like put ads on
> our web sites and charge for software in the hope of stopping the
> hemorrhage of money we spend to develop and provide our service, maybe
> even earning a few cents an hour on our time, or providing some
> justification to significant others for the hours away from them. But
> any way you look at it, this is something you do as a hobby because it
> interests you. So, if it isn't something you are willing to waste
> thousands of hours (and dollars) on, and that decision is repeated a
> few ten-thousand times by everyone else in APRS, it doesn't get done.
That hasnt' stopped things developing in other areas of Ham Radio, in particular
the proliferation of SDR software. Many digimodes, some of which could
potentially knock spots off 1200bd AFSK (RPR* etc) Digital Voice (FreeDV etc)
and digital SSTV etc, most developed by groups of unpaid people, though with a
core few who do the coding, but many who do the testing.
(* RPR is sort of semi propriatary, but tantalisingly some information about it, is
in the public domain.)
I don't know for certain, but I think G3RUH developed the "RUH" 9600bd
modem, much in his own time with others who I forget, that was poorly adopted
(except in small areas) it is however, included as standard in many Kenwood
APRS capable radios.
APRS (sadly) is stuck in a backwater in many people's eyes, compared to what
can be done now, "at very low cost" with a mobile phone, that just about
everyone in the developed world now carries with them nearly all the time.
The best single thing that has happened in recent times to keep APRS going
outside of the US for most people (and I suspect that Bob B may not agree) is
the aprs.fi website.
Meanwhile, for the most part, we're still stuck with an antique AFSK system
designed for voice phone lines, where as has been recently highlighted, there are
major problems with the way it's used with "normal voice" radios to handle the
Not to say, when "correctly" setup and applied it doesn't work well, it can and
does, but there are so much better alternatives now available. Keep the AX25
protocol, that is time tested, it's the on-air modulation schemes that could do
with seriously updating.
What I was trying to get across, is that as most amateur and ex PMR voice radios
have largely the same pre/de-emphasis characterstics, if we are going to keep
1200bd AFSK, lets sort out the modems (software and/or hardware) to cater for
the amplitude/phase distortion that causes. Maybe, it can be done with some
deftly designed analogue allpass filter before the tones are sent to a radio?
You won't change the way the likes of Kenwood do it, feeding the tones directly
into the modulator, and taking the audio from the discriminator, bypassing the
voice pre/de-emphasis "features", but perhaps it could be possible to make
what's on air much much better.
Similar to this. "Back in the day" of CUTS format digital data on cassette tapes
for "home computing". A simple allpass filter came about (by who I don't know)
that when applied between the cassete player's output, and the computers autio
input, dramatically improoved the reliability of the decoded data, to the extent
that for the same tones, it was possible to double the data rate, and keep it
Many people at the time had "Why didn't I think of that" moments, as when you
understood what the problem was, the solution was obvious. (One OP-AMP, and
a handful of passives.)
> Steve K4HG
(And yes, I do know who you are, and what you have done in the past for the
Amateur community as a whole. Much appreciated by many, me included!)
More information about the aprssig