[aprssig] making AGWPE work with an Icom IC-7100

Amateur Radio WB8NUT duffy at wb8nut.com
Sun Jan 18 05:31:30 CST 2015


I think that is correct, with an Icom radio you will need a CI-V interface.

Or you could look at using VOX to key the radio.

Duffy
www.wb8nut.com

> On Jan 18, 2015, at 4:44 AM, John Wiseman <john.wiseman at cantab.net> wrote:
> 
> Andrew,
>  
> How are you trying to key the radio? The 7100 doesn't support RTS or DTR keying, only CI-V, and I'm pretty sure agwpe doesn't support CI-V.
>  
> I have written a program that converts changes to RTS on a Virtual COM port to CI-V PTT Commands. See http://www.cantab.net/users/john.wiseman/Documents/CAT7200.html <http://www.cantab.net/users/john.wiseman/Documents/CAT7200.html>
> It was originally written for the 7200, hence the name, but works with the 7100 if you set the right CI-V address.
>  
> I've found the the UZ7HO soundmodem works rather better than AGWPE. It uses the same interface as AGWPE so is a direct replacement.
>  
> http://uz7.ho.ua/packetradio.htm <http://uz7.ho.ua/packetradio.htm>
>  
> 73, John
> 
> From: aprssig-bounces at tapr.org [mailto:aprssig-bounces at tapr.org] On Behalf Of Andrew P.
> Sent: 18 January 2015 07:09
> To: aprssig at tapr.org
> Subject: [aprssig] making AGWPE work with an Icom IC-7100
> 
> Greetings, all.
> 
> This is going to be a weird question, but has anyone gotten AGWPE to work with an Icom IC-7100 radio? I thought this was the only radio hookup I was getting successful PTT operation with (using fldigi and flrig, according to the setup directions for the 7100), but using the same setup for AGWPE, I can hear packets just fine (better than with the hardware TNC I have connected to another radio), but I can't get the 7100's transmitter to key up (even though AGWPE blinks the task bar lights to indicate it is transmitting).
> 
> I'm using COM9 as the serial port (the first serial port on the IC-7100's USB connection), and Sound Card as the TNC type through the 7100's USB audio device. I know I'm hooked up to the right audio device because I am successfully decoding received packets. But it won't key the transmitter.
> 
> Any advice welcome.
> 
> Andrew Pavlin, KA2DDO
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> http://www.tapr.org/mailman/listinfo/aprssig

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tapr.org/pipermail/aprssig/attachments/20150118/3e91c2f7/attachment.html>


More information about the aprssig mailing list