[aprssig] What is the process add to the APRS symbol document ?
mike.lussier at gmail.com
Wed Sep 9 12:00:09 CDT 2015
I understand between my repeaters and other locals that I also identify because of coexistence with my digi's. They are a mix of VHF & UHF FM, P25 VHF and VHF & UHF Fusion. Just up the road is DStar. Making these more visible to traveler would be a plus. Hopefully in future radios the standard can be expanded on to accommodate these new formats in an auto tune function on a radio.
I will make the adjustment to the comments on the digi's.
I would like to see this go forward.
Sent from my iPhone
> On Sep 8, 2015, at 23:05, Tom Hayward <esarfl at gmail.com> wrote:
> On Tue, Sep 8, 2015 at 11:55 AM, Mike Lussier via aprssig
> <aprssig at tapr.org> wrote:
>> Digital Repeaters:
>> DS = DStar
>> DD = Digital DMR
>> DY = Diigital Yaesu Fusion C4FM/FM
>> DP = P25 P25/FM
>> DM = Mixed Mode
> I broadcast some objects for nv2 repeaters (a TDMA data mode based on
> 802.11). I use the APRS frequency spec to advertise their frequency,
> but the only way to indicate the mode is in the comment. I don't think
> a symbol is necessarily the right solution for this, but I guess it
> would be better than nothing.
> It's too bad the frequency spec does not address this. The closest it
> has to defining a mode is a wide/narrow bit. As far as I can tell,
> wide and narrow aren't even defined anywhere. By context, I'm going to
> guess that wide means FM with 5 KHz deviation and narrow means FM with
> 2.5 KHz deviation. How would one define a SSB frequency? CW? Dstar?
> nv2? It would be really cool to use the frequency spec to allow
> one-touch tuning of a resource advertised by APRS, but without a mode
> definition, there will always need to be some human intervention to
> choose (guess) the mode.
> Tom KD7LXL
More information about the aprssig