[aprssig] What is the process to make changes to APRS symbols document ?

Max Harper kg4pid at yahoo.com
Wed Sep 9 20:46:45 CDT 2015

I've used the aprs-is for many, many, years and without a filter all I've every got was messages and stations that my igate had heard recently. I've never received anything that was related to Dstar. If you were getting objects related to Dstar, with no filter, then the server that you were connected to was not acting correctly. Sounds like it has been fixed.
       From: Tom via aprssig <aprssig at tapr.org>
 To: esarfl at gmail.com 
Cc: aprssig at tapr.org 
 Sent: Wednesday, September 9, 2015 8:02 PM
 Subject: [aprssig] What is the process to make changes to APRS symbols document ?
Hi Tom,

I can't seem to get my point across.  I'm not trying to gate or pass this traffic via a TNC.  This doesn't have anything to do with the filter I'm using and I'm not hearing the DStar stations via RF on my gateway.

I guess you may have to run an APRS Client and watch the tcpip traffic being fed to it by the client connection to the server.

DStar traffic is not being sent back to the connected APRS CLient by default from the connection to APRS IS.  By default prior to the update the DStar stations and positions would display on the APRS Client.  Now it doesn't after the update.

Who writes the software?


Tom - W1TG
aprssig mailing list
aprssig at tapr.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tapr.org/pipermail/aprssig/attachments/20150910/6c1503e2/attachment.html>

More information about the aprssig mailing list