[aprssig] OT:: Jeep and Radio

David Rush david at rushtone.com
Sat Sep 12 14:46:08 CDT 2015


I used something similar for years on my Wrangler, but one that got the 
base of the antenna up higher - closer to the top of the spare tire: 
http://www.arizonarockyroad.com

He's flexible on what kind of mount you want.  Mine had two drilled 
holes several inches apart, one for a 3/8 stud and another for NMO.

73, David, ky7dr

On 2015-09-12 09:32, Nagi Punyamurthula via aprssig wrote:
> Team
> I had recently acquired a Jeep and exploring installing my Kenwood 
> d710g in it.  Mstly for APRS and voice repeaters on 2m/70cm
>
> Wanted to see if folks here have any jeep install pictures you might 
> be able to share for ideas.
>
> The bracket I'm zoning in on is at extremeterrain website
> http://www.extremeterrain.com/rugged-ridge-cb-antenna-jk-1150389.html
>
> While this is meant for CB, I think it can be made to work for 259s
>
> Thanks
> Nagi
>
> Sent from my Windows Phone
>
>
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> http://www.tapr.org/mailman/listinfo/aprssig

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tapr.org/pipermail/aprssig/attachments/20150912/f73b435a/attachment.html>


More information about the aprssig mailing list