[aprssig] APRS in-dash display

KF4LVZ aprssigZbr6 at acarver.net
Sun Jan 17 17:13:55 CST 2016


That's true, it's on the 3.5mm jack but you have to make sure to get a
4-conductor TRRS plug to access it while the board already has the HDMI
port built-in.  If the OP plans to put an LCD screen in already it's
easier to just get one that supports HDMI natively (or the Pi's built-in
display ribbon connector).  It's a little harder to get quality TRRS
cables.  Plus, the HDMI will provide better video resolution and most
HDMI monitors will also have an analog input which can provide support
for the desired rear-view camera (some displays even support
Picture-in-picture)

On 2016-01-17 14:32, Greg D wrote:
> The separate plug is gone on the 2B, but I believe the video signal is
> still available on the 2.5mm jack.
> 
> Greg  KO6TH
> 
> 
> KF4LVZ via aprssig wrote:
>> On 2016-01-17 11:49, Greg D via aprssig wrote:
>>> Hi Lee, all,
>>>
>>> Yes, sorry.  Typo...  The Pi has a built-in baseband 640x480 video
>>> (aka RCA)
>>> output, so I won't need the adapter box.
>> Only the Pi A and B version 1 has the RCA plug.  All the other Pis have
>> HDMI video.
>>
>>
>> _______________________________________________
>> aprssig mailing list
>> aprssig at tapr.org
>> http://www.tapr.org/mailman/listinfo/aprssig
> 
> 



More information about the aprssig mailing list