[aprssig] E Coast 9600 baud backbone 15W radios (firmware?).

Erv Heimbuck erv at heimbuck.com
Wed Jun 1 16:26:59 CDT 2016


From: aprssig [mailto:aprssig-bounces at tapr.org] On Behalf Of Kenneth Finnegan via aprssig
Sent: Wednesday, June 01, 2016 14:04
To: Robert Bruninga; TAPR APRS Mailing List
Subject: Re: [aprssig] E Coast 9600 baud backbone 15W radios (firmware?).

 

I'm still a bit unclear; why are you trying to homebrew data radios with out-of-band PAs when you can get 25W UHF CDM1250s on eBay for less than $100 a piece? I've been converting all my packet stations over to CDM750/CDM1250s; the standard Motorola 16 pin IO connector is fantastic for packet.




--
Kenneth Finnegan
http://blog.thelifeofkenneth.com/

 

While I agree the Motorola radios make great packet radios at low baud rates, I am not sure how they will handle 9600.  I use the Radius in my Igate with grteat reliability.

 

Erv K0OTZ

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tapr.org/pipermail/aprssig/attachments/20160601/59196bbf/attachment.html>


More information about the aprssig mailing list