[aprssig] The East will Rise again! (at 9600?)

Scott Miller scott at opentrac.org
Fri May 6 10:30:26 CDT 2016


The VHF model is available, but we're out of stock as of Wednesday. 
Should have more in a couple of weeks.  There's also a new FC-302 out, 
but it's not in VHF yet.

They work great for 9600 baud, though you do still have to pay attention 
to setting the deviation properly.  We sell the bare radios and we also 
sell them with a Tracker3, but the T3 has never had more than 
experimental 9600 baud support so you'd need to use it with the KPC-9612 
or something.

Scott
N1VG

On 5/6/2016 6:10 AM, Robert Bruninga wrote:
>
> Scott,
>
> I have several of your VHF Data Radios FC-301/D.  I assume they would 
> work fine?
>
> When I google the model number, your current radios under the same 
> model number come up as UHF.
>
> Are VHF still available?
>
> Its just the Radio right?  I assume I hook up an external KPC-9612 to 
> do the AX.25 and modem functions?
>
> Bob
>
> *From:*aprssig [mailto:aprssig-bounces at tapr.org 
> <mailto:aprssig-bounces at tapr.org>] *On Behalf Of *Scott Miller via aprssig
> *Sent:* Thursday, May 05, 2016 2:35 PM
> *To:* aprssig at tapr.org <mailto:aprssig at tapr.org>
> *Subject:* Re: [aprssig] The East will Rise again! (at 9600?)
>
> If we're going to push for expanded 9600 baud implementation, can we 
> pretty please enforce some more rigorous technical standards than on 
> 144.39?  For 1200 baud APRS you never know if you're going to see Bell 
> 202 or V.23, pre-emphasized or flat, deviation could be anything, the 
> HDLC reset sequence is awful for fast clock recovery but there's no 
> other standard preamble, you don't know if the receiving TNC is going 
> to choke on non-printable characters in the payload or if it's even 
> checking FCS or PID, and you've got tens of thousands of Kenwood 
> devices that have a fixed 500 ms TXD.
>
> At 9600 baud there doesn't seem to be much agreement on filter 
> selection and documentation is scarce.
>
> You could probably match 1200 baud's Eb/N0 advantage just by requiring 
> certain basic technical standards on a 9600 baud network.
>
> Scott
> N1VG
>
> On 5/5/2016 10:59 AM, Brian D Heaton via aprssig wrote:
>
>     Why KPC9612s and 2M?
>
>     Commercial TNC/Node combos (KPC9612 and others) - Small computers
>     are available which can provide all the needed/desired functions
>     and interface to multiple TNCs or sound interfaces. Recent testing
>     shows that QPSK/4800 is quite reliable via a sound interface to a
>     radio with a 9600 data port. 9600 is just a step up the chain from
>     that. I expect xPSK (likely OQPSK or 8PSK) rates of around 19200
>     are quite achievable. You can still use KPC9612s if sticking to 9600.
>
>     Many (I will guess "the vast majority") of EOCs already have
>     issues with desense from multiple radios on 2M. If the supporting
>     rationale that may make more sites available is EMCOMM support, I
>     would put the backbone links on either 1.25M or 70cm with a
>     preference for 1.25M. I would keep the backbone frequency clear of
>     users to avoid additional congestion and hidden transmitters.
>     Users could access on 2M/1.25M/70cm (whichever band the backbone
>     link(s) aren't running on) at either 1200 or 9600. Why kill
>     performance of an engineered and well adjusted backbone
>     link/network with user stations?
>
>     73-KY9K/Brian
>
>
>     On 5/5/2016 10:29, Robert Bruninga via aprssig wrote:
>
>         SAVE your KPC9612’s Boys, the East will RISE AGAIN!
>
>         The Golden Packet team is toying with the idea of making our
>         annual Appalachian mountain digipeater string from Maine to
>         Georgia permament and making it a 9600 baud network for
>         emergency and ham radio disaster response and play. We already
>         have 3 of the 14 sites with approval for installations…
>
>         Lets face it, traditional packet networks are dead and
>         although APRS is alive and well, it is specific and only
>         operates at 1200 baud.  Although all fully integrated APRS
>         radios work perfectly well at 1200 and 9600 baud, all of the
>         existing APRS network is 1200 because all the digipeaters (not
>         integrated APRS radios) operate at 1200 and the majority of
>         all home APRS stations and IGates use TNC’s that operate at
>         1200.  A huge legacy. Besides, going to 9600 only barely
>         doubles APRS speeds while degrading link reliability.
>
>         So, since we have already shown for 6 years now, that this
>         long 2000 mile linear chain of mountains and valleys can
>         support a 2000 mile network with only 14 digis,  why not
>         establish a long haul 9600 baud Node chain from Maine to
>         Georgia which could be a significant boost to Packet radio
>         emergency operations. The network would not operate as APRS
>         digipeaters but as KAnodes.   As we all knew back in the
>         1990’s link-by-link acknowledgment was vastly superior to
>         end-to-end.
>
>         We already have three sites in MD, and PA …  But we need more
>         than hikers, to get us access to some existing ham radio
>         maintained sites.  We do NOT want nodes to branch off down
>         into the plains.  These nodes would bog down the network.  No,
>         the main backbone would be to support emergency operations
>         with beams that can point up to the mountains to pass traffic.
>
>         So, we are splashing this onto the APRSSIG to see if people
>         have SITE access and/or have unused 9600 baud KPC-9612’s to
>         step up and lets see what we got.  Also will need a freq.  I’m
>         thinking 145.01 but every time I think of it, people give
>         feedback, and I LOSE or forget the feedback as to what
>         existing systems are already on 145.01, such as DX clusters, etc…
>
>         Every day we get MORE AND MORE addicted to our wireless
>         infrastructure, which we all know, will be hard to access in a
>         real emergency.  We need to keep the Ham radio Plan-B alive…
>
>         Bob, WB4APR
>
>
>
>
>         _______________________________________________
>
>         aprssig mailing list
>
>         aprssig at tapr.org <mailto:aprssig at tapr.org>
>
>         http://www.tapr.org/mailman/listinfo/aprssig
>
>
>
>
>     _______________________________________________
>
>     aprssig mailing list
>
>     aprssig at tapr.org <mailto:aprssig at tapr.org>
>
>     http://www.tapr.org/mailman/listinfo/aprssig
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tapr.org/pipermail/aprssig/attachments/20160506/de4ed225/attachment.html>


More information about the aprssig mailing list