[aprssig] Dirty signals vs. hardware TNCs

david vanhorn kc6ete at gmail.com
Wed May 11 21:09:48 CDT 2016


"do we use hardware TNCs that will reject their signals as QRM and keep
them from propagating?"

You do know that the digi does not copy the distortion, right?  It creates
a new packet and the quality is the same as any other packet it puts out.

On Wed, May 11, 2016 at 8:07 PM, John Langner via aprssig <aprssig at tapr.org>
wrote:

>
>
> Suggested reading on the subject.
>
>
> Sometimes it's a little mystifying why an APRS / AX.25 Packet TNC will
> decode some signals and not others. A weak signal, buried in static, might
> be fine while a nice strong clean sounding signal is not decoded. Here we
> will take a brief look at what could cause this perplexing situation and a
> couple things that can be done about it.
>
>
> https://github.com/wb2osz/direwolf/raw/master/doc/A-Better-APRS-Packet-Demodulator-Part-1-1200-baud.pdf
>
>
>
> Here, we take a closer look at some of the frames on the TNC Test CD in
> hopes of gaining some insights into why some are easily decoded and others
> are more difficult. There are a lot of ugly signals out there. Many can be
> improved by decreasing the transmit volume. Others are just plain weird and
> you have to wonder how they are being generated.
>
>
> https://github.com/wb2osz/direwolf/raw/master/doc/A-Closer-Look-at-the-WA8LMF-TNC-Test-CD.pdf
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> http://www.tapr.org/mailman/listinfo/aprssig
>



-- 
K1FZY (WA4TPW) SK  9/29/37-4/13/15
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tapr.org/pipermail/aprssig/attachments/20160511/dec71f06/attachment.html>


More information about the aprssig mailing list