[aprssig] Maximum APRS Packet Lengths and 3rd party use?

Pete Loveall AE5PL Lists hamlists at ametx.com
Wed Nov 30 16:19:34 CST 2016


Grr, once again caught by the default Reply action to go directly to Scott...

Hi Scott,

The blocking we are talking about is done in the IGate software and should not be configurable by the user.  The server-side filters do not "filter" any packets going -to- the server and the IGates should be making their own decisions regarding what packets are gated to RF (server-side filters are -not- to be relied upon directly for this decision process as the server will provide more packets than should be gated to RF; this decision process is an IGate internal process).

This thread is addressing software author concerns (maximum packet length, third-party packet formatting and blocking, etc.).  In general, these should not be configurable by the user, novice or long-time expert. ;-)

Hope this helps.

73,

Pete Loveall AE5PL
pete at ae5pl dot net

> -----Original Message-----
> From: Scott
> Sent: Wednesday, November 30, 2016 2:03 PM
> Subject: Re: [aprssig] Maximum APRS Packet Lengths and 3rd party use?
> 
> As a novice, could I trouble the group for the correct filter syntax to
> block *TCPIP* from being iGated?
> 
> And while we're at it, if there are any other filters that should "always"
> be included in any iGate setup, those would of course be welcome as well.


More information about the aprssig mailing list