[aprssig] Digipeater Symbol Overlays

Frank Knobbe k4fhk at knobbe.us
Tue Oct 18 16:37:34 CDT 2016


On Mon, 2016-10-17 at 23:21 -0700, Kenneth Finnegan wrote:

> My suggestion for a suggested set of Digipeater overlays for us to
> promote to users is as follows:
> 
>  /# - Generic WIDEn-N digipeater
>  1# - WIDE1-1/direct-only digipeater
>  A# - Alternate input (i.e. 144.990MHz) digipeater
>  I# - I-gate equipped digipeater
>  S# - SSn-N local net alias digipeater
>  X# - eXperimental digipeater


Would it make sense to reserve a symbol, say C#, for cross-band digi?
One that digis' VHF onto UHF? (The other direction may not be
desirable).

Cheers,
Frank


PS: On the viscous digi thread, I personally see it more of a mode of
operation. I think with any symbol, one should focus on the primary
reason/task for the device. For example, my TX Igate is a standard Igate
symbol with T overlay, but it also viscously digipeats anything our high
digis didn't catch (like a fill-in-as-needed digi...lol). But, it's
primarily a TX Igate, so I chose that symbol.

Since the viscous digi is primarily a direct-only digipeater, I think a
1# would be more appropriate. The fact that the direct-only digi is also
viscous seems secondary, at least to me.






More information about the aprssig mailing list