[aprssig] Bluetooth RS232 adapters to run a TNC?

John D. Hays john at hays.org
Sun Sep 11 13:10:59 CDT 2016


As time moves forward, there are other options.  For example if you use a
Raspberry Pi 3 (built-in Wifi), you then run the UDRC II
<http://nwdigitalradio.com/product/udrc/> and Direwolf to control 1 or 2
radios at 1200 or 9600 baud (or other speeds if desired).  WiFi has a much
better range than Bluetooth, even going as far as being to operate remotely
over the Internet. (With proper security, like a VPN)

Also using AGWPE (or KISS) over the network means more than one device can
access your network attached TNC.

https://nw-digital-radio.groups.io/g/udrc/wiki/UDRC%E2%84%A2-and-Direwolf-Packet-Modem


> ------------------------------
> *From:* Jim (List) <jim.list at stuckinthemud.org>
> *To:* aprssig at tapr.org
> *Sent:* Sunday, September 11, 2016 9:12 AM
> *Subject:* [aprssig] Bluetooth RS232 adapters to run a TNC?
>
> Does anyone have experiences of using a Bluetooth<>RS232 adapter to
> communicate with a TNC?
>
> With the prevalence of Windows pad devices with no USB ports, I’m sure
> people have done this but Google can’t find anything (apart from loads of
> the units themselves).
>
> Specific application will be a Microsoft Surface running AGWPE, talking to
> a Kantronics TNC.
>
>
>
> Jim, G1HUL
>
>


-- 

------------------------------
John D. Hays
K7VE

PO Box 1223, Edmonds, WA 98020-1223
   <http://k7ve.org/blog>  <http://twitter.com/#!/john_hays>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tapr.org/pipermail/aprssig/attachments/20160911/78464320/attachment.html>


More information about the aprssig mailing list