[aprssig] TNCx TCP/IP over radio

Andrew Rich vk4tec at tech-software.net
Wed Sep 14 22:57:42 CDT 2016


Anyone got suggestions on point to point and payloads ? 

For 1200 baud channels that are shared with other packet users, an mtu value of 256 is reasonable; in fact, since that is the largest packet size most non-TCP/IP ham networks (like digipeaters and NetRom) are designed to handle, 256 is the largest mtu you should specify if any of your packets are going to travel via such a node.

-----------------------------
Sent from my iPhone
Andrew Rich
e vk4tec at tech-software.net
w www.tech-software.net
m 0419 738 223

> On 15 Sep 2016, at 13:52, Andrew Rich <vk4tec at tech-software.net> wrote:
> 
> Server not found sorry
> 
> 
> -----------------------------
> Sent from my iPhone
> Andrew Rich
> e vk4tec at tech-software.net
> w www.tech-software.net
> m 0419 738 223
> 
> On 15 Sep 2016, at 13:37, Bill Vodall <wa7nwp at gmail.com> wrote:
> 
>>> Could the TNCx be used for TCP/IP over radio ?
>>> 
>>> Raspberry Pi
>> 
>> Sure.  It's a KISS TNC and a Linux computer.   We Hams have been doing
>> that for 25+ years.
>> 
>> http://www.febo.com/hamdocs/intronos.html
>> 
>> There are probably better Linux less JNOS sites easily found with
>> google but the concept of TCP data on AX25 is the same.
>> 
>> Direwolf will give you better speed and performance these days so try
>> it before buying a new dedicated 1200 baud TNC.
>> 
>> 73,
>> Bill - WA7NWP
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tapr.org/pipermail/aprssig/attachments/20160915/44d1703e/attachment.html>


More information about the aprssig mailing list