[aprssig] Perl and TNC X

Andrew Rich vk4tec at tech-software.net
Tue Sep 27 10:23:07 CDT 2016


Thanks Charlie for your help



Andrew

-----------------------------
Sent from my iPhone
Andrew Rich
e vk4tec at tech-software.net
w www.tech-software.net
m 0419 738 223

> On 28 Sep 2016, at 01:20, Charles Blackburn <ai4ri at cfl.rr.com> wrote:
> 
> Perl and the pi with a TNC work fine.
>  
> I’ve used it to create a linux QRU server a couple of years ago. Again using the FAP library.
>  
> As far as the ax25 stack, get the latest version from the maintainers, the versions in the repositories are usually way out of date (at least for Ubuntu and rasbian) they are easy to compile and work fine.
>  
> Then just set it up like you would any linux based machine and use AX0 etc for the interface to the tnc. That actually makes it easier as your program can use it just like any other network interface and you don’t have to worry about framing packets manually as the stack takes care of all that for you.
>  
> If you need any help, don’t hesitate to get with me off list.
>  
> I also second ARPx I just haven’t had much time to play with it.
>  
> Charlie
>  
> From: aprssig [mailto:aprssig-bounces at tapr.org] On Behalf Of Kenneth Finnegan
> Sent: Monday, September 26, 2016 19:42
> To: Jason KG4WSV <kg4wsv at gmail.com>
> Cc: TAPR APRS Mailing List <aprssig at tapr.org>
> Subject: Re: [aprssig] Perl and TNC X
>  
> The Raspberry Pi also happens to be a supported arch for Aprx, so you can download a precompiled deb file here: http://thelifeofkenneth.com/aprx/debs/aprx_2.9.0_raspi.deb
>  
> Install it with "sudo dpkg -i aprx_2.9.0_raspi.deb" and it supports auto-start by editing /etc/default/aprx after setting up the config file how you'd like.
> 
> --
> Kenneth Finnegan, W6KWF
> http://blog.thelifeofkenneth.com/
>  
> On Mon, Sep 26, 2016 at 4:37 PM, Jason KG4WSV <kg4wsv at gmail.com> wrote:
> 
> > On Sep 26, 2016, at 10:23 AM, Andrew Rich <vk4tec at tech-software.net> wrote:
> >
> > Do you know of a command line ish kiss to Igate software
> 
> I'm working with aprx. Runs great as a daemon on the BBB so it should run equally well on the pi.
> 
> I had to hack out a script to get the BBB to automatically start it as a service when the system boots.
> 
> -Jason
> kg4wsv
> 
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> http://www.tapr.org/mailman/listinfo/aprssig
>  
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> http://www.tapr.org/mailman/listinfo/aprssig
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tapr.org/pipermail/aprssig/attachments/20160928/ca6db529/attachment.html>


More information about the aprssig mailing list