[aprssig] IGate FIlter for AMSATS?

Pete Loveall AE5PL Lists hamlists at ametx.com
Sun Feb 26 06:46:05 CST 2017


I have just released an update to APRSIGate (the javAPRSSrvr IGate module) that supports "SatGate mode".  As previously described, this allows operators local to a receive-only SatGate to be reported to APRS-IS only after being digipeated while still passing packets heard directly from the satellite as well as all digipeated packets.  I can be contacted directly by any ham looking to implement javAPRSSrvr.  This provides full SatGate operation within the confines of the current APRS-IS architecture.

73,

Pete Loveall AE5PL
pete at ae5pl dot net

> -----Original Message-----
> From: aprssig [mailto:aprssig-bounces at tapr.org] On Behalf Of Pete Loveall
> AE5PL Lists
> Sent: Saturday, February 25, 2017 8:09 AM
> To: TAPR APRS Mailing List <aprssig at tapr.org>
> Subject: Re: [aprssig] IGate FIlter for AMSATS?
> 
> As a compromise on #1, if the directly heard station has no path, it could be
> passed to APRS-IS.  This would solely prevent packets heard directly with a path
> from being passed upstream, not all directly heard packets.  This would cover
> hearing satellite packets directly since they should never have a path or they
> should only show digipeated by their internal digipeater (either would be
> acceptable).


More information about the aprssig mailing list